Sink Installation Guide
8
3. Install sink
4. Install plumbing xtures
•  Connect drain to sink. Connect trap to drain. Connect water supply 
 connections to faucet according to manufacturer’s instructions
•  Run water into sink and check for leaks
•  Check the alignment of the sink to the opening in the countertop. Use a 
 bead of clear silicone (or preferred adhesive) around the underside of the sink
•  Carefully place the sink on the countertop, align, and press rmly
•  Allow sealant to set for 30 – 60 minutes
2”
2 1/2”
2”
2 1/2”
NOTE: Please make sure Kraus logo is facing you when mounting sink
NOTE:  Use acetone or rubbing alcohol to remove any excess sealant 
immediately after application










