INSTALLATION GUIDE Purita™ Single Handle Water Filtration Faucet FF-100 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List A G B C D E F A. Faucet Assembly B. Flange C. Rubber Washer D. Metal Washer E. Mounting Nut F. Connector G.
Faucet Dimension 7 1/8” 2 3/4“ [181.5mm] [69.5mm] 6” 8 3/8“ [212.0mm] 12” [304.5mm] [153.0mm] Ø1 3/4" [Ø45.0mm] [77.
Step 1: Preparing for installation Remove the rubber washer (C), metal washer (D), and mounting nut (E) from the end of the stud. C D E Step 2: Installing the faucet assembly A C D E 5 Place the faucet assembly (A) through the selected hole in the sink or countertop. On the underside of the sink or countertop, slide the rubber washer (C) and metal washer (D) onto the stud. Thread the mounting nut (E) onto the stud, and tighten securely using your wrench.
Step 3: Connecting the quick connect adaptor and water line A Thread the quick connect adaptor (F) onto the end of the faucet assembly (A) stud, and tighten securely using a wrench. Connect the 3/8 in. water line from the filtration system by pushing the line into the connector (F). Pull down on the 3/8 in. line slightly to ensure the quick connect fitting has engaged. F 3/8 in.
Replacement Parts 1 Replacement Parts List Finish / Color 1 2 3 4 5 CH, SFS, MB, BG, KP27169 BB, SFACB, SFSB* 3. Locking Ring KP27170 4. O-ring KP27171 5. Cartridge KP27172 6. Handle CH, SFS, MB, BG, KP27173 BB, SFACB, SFSB* 7. Index GR, BL* 8. Flange CH, SFS, MB, BG, KP27174 BB, SFACB, SFSB* KP27194 9. Rubber Washer KP27175 10. Metal Washer KP27176 11. Mounting Nut KP27177 12. Connector KP27178 13.
10 Trouble - Shooting 9 Hexagon Nut 11 If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps: 12 PROBLEM C A U S13E ACTION Leakage under the handle Cartridge (5) has come loose Remove index (7) and loosen set screw with hex wrench (13). Remove the Cold handle.
Codes/Standards Applicable: NSF/ANSI 372 LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1 1GPM 3.8L/min maximum TM Faucet Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (”Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.