Faucet Installation

10
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leaking from faucet
handle
Locking nut (11) may
have come loose, or
cartridge (12) may need
to be reseated
Remove cover button
(7). Loosen set screw
(8) with 2.5 mm hex
wrench (19). Remove
handle (9). Unscrew
cartridge cover (10)
by hand. Tighten
locking nut (11) with an
adjustable wrench
Water does not shut off
completely
Cartridge (12) may
need to be adjusted or
replaced
Remove cover button
(7). Loosen set screw
(8) with 2.5 mm hex
wrench (19). Remove
handle (9). Unscrew
cartridge cover (10)
by hand. Unscrew
locking nut (11) with
an adjustable wrench.
Remove cartridge
(12). Check for cracks,
and if O-ring is seated
correctly. Reseat
cartridge (12)