Installation Guide

Step 3
Step 4
Thread the cap (A) and the nut & washer (B) fully
onto body, with the slotted vents (1) facing the
wall. Tighten the nut (D) firmly.
Note: The air gap is to be installed so that the
flood level mark (F/L) shall be at or above the
flood level of the sink or other receptacle which
may be connected to the sanitary drain into
which the air gap discharges.
Connect the dishwasher outlet hose
(5/8 '' I.D.) (1) to air gap inlet (smaller diameter
leg) (2) and to dishwasher outlet (3) using
hose clamps (4). Connect the drain hose
(7/8 '' I.D.) (5) to air gap outlet (larger
dimension leg) (6) and to "Y" fitting (7) or
disposer (8) using hose clamps. (1, 3, 4, 5, 7, 8
are not included).
(F/L)
A & B
D
1
OR
1
3
4
4
4
2
5
6
8
4
4
7