Specification

Installation Instruction

Single Handle Pull-down Kitchen Faucet

Before Your Installation

Check to make sure you have the following parts indicated below:

Tools You Will Need

Adjustable wrench

Phillips screwdriver Pipe tape (supplied)

Spanner for body (supplied) Spanner for aerator (supplied)

Replacement Parts

Keep this manual for ordering replacement parts.

1. Sprayer

2. Hose

3. Plastic cover

4. Spring holder

5. Spout

6. White o-ring

7. Plastic cover

8. O-ring

9. Plastic cover

10. Plastic cover

11. Screw

12. Faucet body

13. Cartridge

14. Screw

15. Lock nut

16. Cartridge holder

17. Handle

18. Screw

19. Cover

20. Bottom plastic

21. Washer

22. Strengthening part

23. Rubber gasket

24. Stainless steel gasket

25. Screw

26. Steel gasket

27. Hexagon nut

28. Plastic nut

29. Spring

30. Hose

PAGE 1
Installation Instruction Single Handle Pull-down Kitchen Faucet Before Your Installation Replacement Parts Keep this manual for ordering replacement parts. 1. Sprayer 2. Hose 3. Plastic cover 4. Spring holder 5. Spout 6. White o-ring 7. Plastic cover 8. O-ring 9. Plastic cover 10. Plastic cover 11. Screw Check to make sure you have the following parts indicated below: 12. Faucet body 13. Cartridge 14. Screw 15. Lock nut 16. Cartridge holder 17. Handle 18. Screw 19.
PAGE 2
Product Dimension Drawing Faucet Installation Procedures Step ① Step ② Add the part if the faucet is not firm on the worktop.
PAGE 3
Step ③ Step ④ Step ⑤ Step ⑥ Step ⑦ Step ⑧
PAGE 4
Step ⑨ St e p 11 Step ⑩ St e p 12 Notice: Please removing all of the sand, silt and other things from the water hose before assembling, to avoid blocking the faucet and effecting water rate. Please use the special tools to disassemble it and wash with pneumatic equipment, if the faucet blocked.