I N S TA L L AT I O N MA N UA L Premier Outlast MicroShield™ Scratch-Resist Stainless Steel Undermount Kitchen Sink KBU10E / KBU12E / KBU14E / KBU22E KBU23E / KBU24E www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list.
I Tools you will need: Phillips screwdriver Hex wrench Silicone Sealant Safety Goggles Drill Phillips Screwdriver Putty Knife Silicone Sealant Silicone Adhesive Jig Saw B Hex wrench Scissors Adjustable wrench Phillips screwdriver Tape Measure Pencil Screwdriver Tools You Will Need I J J F Adjustable wrench NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite D Parts List • Cut-Out Templ
Dimensions KBU14 Ø3-1/2" Ø89 21-3/8” 542mm 29-1/2” 750mm 23-3/8” 594mm 10” 255mm 9” 230mm 31-1/2” 800mm KBU10E 23 3/8” x 21” x 9” Min Cabinet Size: 27” Matching Grid: KBG-10 Drain Model #: BST-1 KBU14E 31 1/2” x 18 3/8” x 10” Min Cabinet Size: 36” Matching Grid: KBG-14 Drain Model #: BST-1 KBU12 Ø Ø Ø89 Ø89 18” 457mm 16 ” 409mm 17-1/2” 445mm 15-7/8” 403mm KBU22 Ø3-1/2" Ø89 18-3/8” 467mm 16-1/4” 413mm 21” 535mm Ø3-1/2" Ø89 18-3/4” 478mm KBU10 21” 534mm 14 ” 368mm 23” 584mm 14 ” 3
KBU23 Dimensions 10-1/2” 266mm 9” 229mm 7” 178mm 9” 229mm 20 ” 470mm 13” 330mm 32” 813mm KBU23E 31 1/2” x 20 1/2” x 9” Min Cabinet Size: 36” Matching Grid: KBG-23-1, KBG-23-2 Drain Model #: BST-1 & ST-1 5 Ø89 20 ” 419mm 15 ” 400mm 31-1/2" 800mm Ø Ø89 18 ” 473mm 20 ” 524mm Ø ” 7 181mm 17-3/4” 450mm 18” 457mm 16” 406mm 18-1/2” 470mm 20-1/2” 521mm KBU24 KBU24E 32” x 20 5/8” x 9” Min Cabinet Size: 36” Matching Grid: KBG-24-1, KBG-24-2 Drain Model #: BST-1 & ST-1
DETERMINE REVEAL TYPE 1.
Step1 2.
Step2 3.
Step3 4.
Determine location for mounting brackets; space 3/8”POSITIVE 1/8”NEGATIVE ZERO Centerline 5. Set up Mounting Brackets • Turn countertop over and align sink with countertop. Decide location for mounting brackets • Mounting holes should be ½” from edge of sink Step5 Step6 1/2" (13mm) Step5 6.
7. Install Anchors Step6 • Insert anchors into drilled holes and lightly tap with a hammer until flush 1/2 Step7 8. Secure Sink to Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
9. Attach Mounting Hardware Step8 • Attach mounting hardware to secure bowl.
10. Install Plumbing Fixtures • Connect drain to sink. Connect trap to drain.
Codes/Standards Applicable: HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro Representative at: Kraus USA, Inc.
R E G I S T E R Y O U R P R O D U C T T O D AY Scan to Register Onlin e We’re always looking for ways to improve. Please take a moment to share your experience. Visit www.kraususa.com and let us know what you think. Contact Us To Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.com Like & Follow KrausUSA www.kraususa.