VERSION 1.
32 1/4'' 18 1/2’’ 16 1/2'' VERSION 1.
3. Place the faucet on the countertop. 4. If the countertop is thin or the faucet is being mounted on the sink itself, place the countertop extender (#11) from underneath the countertop and tighten it onto the tailpiece (#5). **OPTIONAL** 5. Place the metal washer (#6) onto the tailpiece (#5) from underneath the countertop. 6. Place the fixing set (#7) onto tailpiece (#5) underneath the countertop and tighten it. 7. Connect pullout hose (#10) to copper tube. see details on page 2 8.
Rubber Washe Tailpiece Metal Washer Fixing set Weight Hot & Cold Water Lines Pullout hose 4 Faucet Extender (optional) (ALREADY ATTACHED) 5 IMPORTANT Screw at back of faucet tightens the goose neck to the body.
