Installation Guide

4. Install sink

5. Install plumbing xtures

• Connect drain to sink. Connect trap to drain. Connect water supply

connections to faucet according to manufacturer’s instructions

• Run water into sink and check for leaks

NOTE: Use acetone or rubbing alcohol to remove any excess sealant

immediately after application

• Check the alignment of the sink to the opening in the countertop. Use a

bead of clear silicone (or preferred adhesive) around the underside of the sink

• Carefully insert the sink in place, align, and press rmly

• Allow sealant to set for 30 – 60 minutes

13.4” (340mm)