INSTALLATION GUIDE Arlo™ Single Lever Vessel Faucet KVF-1200 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List G A H I B C D J E F A. Faucet Body D. Nut & Screws G. Aerator B. Plastic Washer E. Waterlines H. Aerator Key C. Metal Washer F. Flange & Washer I. Hex Wrench 3 J.
Faucet Dimension 6 3/4" [171mm] 5" [128mm] 12 1/8" [307mm] 8 1/8" [208mm] 2 1/4" [56mm] 2 1/2" [64mm] 2-9/16-24UNEF-2B Installer Tip: 4
Step 1: Remove washers and nut old faucet. Clean the mounting surface. Remove the plastic washer (B), metal washer (C) and nut & screws (D) from the faucet (A). A B C D Step 2: Install faucet A F Before installation, ensure that the flange (F) is placed on the bottom of the faucet assembly (A). Place faucet (A) through the 1-3/8” holes in countertop . Secure the faucet (A) to the countertop using the plastic washer (B), metal washer (C) and nut & screws (D) provided.
Step 3: Connect waterlines to main valve Attach waterlines(E) to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) E Step 4: Install Press pop-up assembly 1 2 Unscrew the nut (6) from the pop-up body (2), move over the tail pipe (7) and washer (5), then unscrew the coupling nut (4) and remove the washer (3).
Step 4: Install Press pop-up assembly Place the washer (1) underneath the 3 217 8 17/32” 279 10 31/32” 4 the pop-up body (2) down through the drain hole on the vessel or basin. From underside, slide the washer (3) against the bottom of the vessel or basin, thread on the coupling nut (4) and tighten. Do not overtighten. Max35 Max1 3/8” 1 2 Slide the nut (6) over the tail pipe (7). Place the washer (5) into the nut and tighten. Do not overtighten.
Replacement Parts Replacement Parts List Finish / Color 2 3 15 815 32 3/32” 4 194 7 5/8” GR, BL 1. Cover Button 1 2. Set Screw 4. Cap 7 5. Bonnet Nut 1 2 CH, SFS, ORB, MB BG KP27046 CH, SFS, ORB, MB BG KP27048 3 6. Screw Ø35~Ø38 Ø1 3/8~Ø1 1/2” 9 14 10 KP27050 8. Aerator 4 9. Aerator Key 6 90m 7 KP27051 11. Metal Washer KP27147 12. Nut & Screws KP27148 13. Flange & Washer CH, SFS, ORB, MB KP27053 BG 14. Drain CH, SFS, ORB, MB KP27059 BG 15.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE Leakage under the handle 10 Bonnet nut (5) has come loose Hexagon Nut 9 11 ACTION Remove the index (1). Loosen set screw (2) with hex wrench (15). Remove the handle (3). Unscrew cap (4) (by hand only).
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R &T NSF/ANSI 61 ASME A112.18.1 1.2GPM 4.5L/min maximum TM Faucet Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
