Installation Guide

Step 1: Remove washers and nut
old faucet. Clean the mounting surface.
Remove the plastic washer (B), metal
washer (C) and nut & screws (D) from
the faucet (A).
B
C
Step 2: Install faucet
A
A
F
D
5
B
C
D
E
D
Before installation, ensure that the
flange (F) is placed on the bottom
of the faucet assembly (A). Place faucet (A)
through the 1-3/8” holes in countertop .
Secure the faucet (A) to the countertop
using the plastic washer (B), metal
washer (C) and nut & screws (D) provided.
Hand tighten the nut onto the end valve
shank. Lock the nut into position by
tightening the screws (D) with
a phillips screwdriver.