Use and Care Manual
STAINLESS STEEL SINKS
To prevent water spots and clouding, rinse and wipe the inside of the sink with a microber
cleaning cloth after every use.
For a more thorough cleaning, use water and a mild liquid soap detergent (ammonia-free).
Apply the cleaner with a soft sponge, then rinse with lukewarm water and pat dry with
a microber cleaning cloth.
Polishing your sink weekly will help to retain the luster of the stainless steel. We recommend
using your choice of cleaner from the Products to Consider section below.
For maximum surface protection, we strongly recommend using a Kraus bottom grid,
included with most Kraus stainless steel sink models. If you need a new or replacement grid,
our customer service team will be glad to help!
Do not use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine.
These products may damage the sink nish.
Do not use any abrasive pads, steel wool, or wire brushes when cleaning the faucet. Using
these will damage and/or wear down the sink nish.
Do not leave pots, utensils, or standing water in the sink, as this may cause rust stains on
the sink surface.
Products to Consider:
• Weiman® Stainless Steel Cleaner
• Howard Naturals® Stainless Cleaner
• Fantastik® Antibacterial Heavy Duty Cleaner
• Green Works® All-Purpose Cleaner
• Green Works® Glass Cleaner
• Windex® Original Glass Cleaner
• Soft cloth
• Sponge
• Use 3M Scotch Brite® Pad Non-Abrasive
for tougher stains
• Bar Keepers Friend®