Use and Care Manual
GRANITE SINKS
To prevent water spots, clouding, and discoloration, rinse and wipe the inside of the sink with
a microber cleaning cloth after every use.
For a more thorough cleaning, use water and a mild liquid soap detergent (ammonia-free).
Apply the cleaner with a soft sponge or nylon brush and scrub in circular motions. Remember
to thoroughly wash away any extra soap left behind after cleaning.
To clean, seal, and protect your granite sink, use a pH neutral cleaner. We recommend using
your choice of cleaner from the Products to Consider section below.
To deep-clean tough stains, products to consider include: Mr. Clean Magic Eraser, Supreme
Surface Scum & Mineral Deposit Remover. Make sure to follow the cleaning instructions
provided by the product’s manufacturer.
Do not use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine.
These products may damage the sink surface.
Do not use any abrasive pads, steel wool, or wire brushes when cleaning the sink. Using these
will damage and/or wear down the sink surface.
Do not leave pots, utensils, or standing water in the sink, as this may cause rust stains on the
surface of the sink.
Products to Consider:
• Supreme Surface® Granite Cleaner & Conditioner
(may be used daily)
• Soft Scrub®
• Dishwasher soap
• White vinegar + water solution 50/50
• Weiman® Granite Cleaner & Polish