I N S TA L L AT I O N MA N UA L Aplos™ Single Handle Vessel Bathroom Faucet KEF-15300 www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
7/8” (22mm) 19.7 º 10 1/8” (257mm) 8 5/16” (21mm) ∅ 1 15/16” PRIOR TO INSTALLATION (∅ 50mm) ∅ 1 3/4” (∅ 45mm) • ∅ 1 15/16” (∅ 50mm) • 1 3/8” (35mm) Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing of damaged, please contact Kraus Customer Service at 800775-0703 for a replacement. Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
Diagram and Parts List D E A B C1 C2 C3 C4 A. Faucet Body D. Aerator B. Waterlines E. Aerator Key C. Mounting Hardware Assembly C1. Rubber O-Washer C2. Metal O-Washer C3. Mounting Nut C4.
Faucet Dimensions (2-1/4”) (1-3/8”) Ø35mm max30 (6-3/8") 161mm (1-1/8”) 248mm 297mm (9-3/4”) (11-3/4”) 58mm G1/2 5
Step 1 Step 2 Step 1: Remove mounting hardware Step Remove the mounting hardware assembly (C) 8D C1 C2 Step 2 C3 C4 Step 5 Step 2: Install hot & cold waterlines Step 3 Install waterlines (B) • Hot Side: Left • Cold Side: Right9 10TIGHTEN Installer Tip: HAND ONLY A B 8A 8B B C D 6 8C 8D 8A 8B 8C 8D Step4
8B 8C 8D Step 3 Step 3: Install faucet 9 Place faucet body (A) through 10 1-3/8” hole in countertop.
Step4 Step 4: Connect waterlines to main valve Attach waterlines (C) to angle stops and tighten until snug.
Replacement Part List - KEF-15300 1B 1A 15 2 3 5 1. 4 6 12 13 14 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. A. Cap B.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work Hexagon Nut 9 properly, take the following11corrective steps: PROBLEM 12 C A U13S E ACTION Leakage under the handle Locking nut (4) has come loose Remove cap (1a). Loosen set screw (1b) with hex wrench (15). Remove metal handle (2). Unscrew cartridge Hot Cold cover (3) (byWater hand only).
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
