INSTALLATION GUIDE VENTUS SINGLE LEVER VESSEL BATHROOM FAUCET KEF-15000 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
.8’’ 10 1/8” (257mm) AB1953 8 5/16” (21mm) ∅ 1 15/16” (∅ 50mm) 1 3/8” (35mm) ∅ 1 3/4” (∅ 45mm) Exquisite Collec Installation Man Extended single-lever bathroo ∅ 1 15/16” (∅ 50mm) Prior to Installation: O 1.4’’ • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List 1. Faucet body 2. Threaded pipe 1 4. Rubber washer 5. Brass washer 6. Fixing ring 7. Mounting screws 2 3 4 5 6 7 8 3 8. Waterlines 8.8’’ 3.
Faucet Dimensions 8.8’’ 12.6’’ 7.1’’ O 2.5’’ O1.4’’ 5.2’’ KRAUS Brand Bathroom Faucets Limited Lifetime Warranty KRAUS is proud to offer its customers the strongest, most durable ceramic cartridges in all solid brass Bathroom Faucets it manufactures. KRAUS guarantees all products to be free of defect in materials and craftsmanship. All KRAUS BRAND Bathroom Faucets carry a limited lifetime warranty from the original date of purchase.
Step 1 Place the O-ring 2 over threaded pipe to the bottom of the faucet body1.
Step 2 Insert the rubber washer 4 and brass washer 5 on to the threaded pipe 3, then screw the fixing ring 6. After place faucet body 1 correctly and tighten the mounting screws 7. Screw waterlines 8 into the corresponding screw-hole of faucet body 1 2 nc.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: 10 PROBLEM CAUSE Hexagon Nut 9 ACTION 11 Leakage under the handle 12 Adjusting ring or cap has come 13 loose Unscrew the aerator to check rubber packing or replace the aerator Aerator leaks or has an inconsistent water flow pattern Aerator is dirty or misfitted Unscrew the aerator to Hot Cold Waterpacking Water check rubber or replace the aerator
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
