R INSTALLATION GUIDE Britt All-in-One Commercial Filter Faucet TM KFF-1691 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! R Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
STOP Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. R R · Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
Diagram and Parts List A. Spray Head B. Faucet Body C. Mounting Hardware C1. Rubber & Metal Washer C2. Mounting Nut C3. Mounting Screw D. Flange & Washer E. 2.5 mm Hex Wrench F. Aerator Key G. 3-Way Connector H. 1/4 to 3/8 Connector x 2 I. EZ-Weight J. Plastic Stabilizing Base H G B A F I J D E C1 C2 C3 For technical assistance or replacement parts, please contact Kraus R Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or customerservice@kraususa.
Faucet Dimensions 4 3/4" 22" 10 1/2" (268.3mm) (131mm) 5 1/8" 5 3/4" (145.5mm) 8 1/2" (560mm) 10 1/2" (267mm) (120mm) (216.9mm) 2 1/8" (55mm) Installer Tip: Shut off main water supply before installing new faucet.
Step 1. Install the faucet assembly B D 2 1 Before installation, ensure that the flange (D) is placed on the bottom of the new faucet assembly (B). Insert the faucet body and all hoses through the hole in the sink. 1. Install the pull down hose with connector first. 2. Install the hot and cold inlet hoses. 3. Install the supply hose. 3 Step 2. Secure the faucet assembly B J Optional (see note) 6 Install the plastic washer and metal washer (C1) onto the threaded mounting shank.
Step 3. Connecting the filter connection and water line Connect the 1/4 in. water line from the filtration system by pushing the line into the connector (G). Pull down on the 1/4 in. line slightly to ensure the quick connect fitting has engaged. 1 2 NOTE: The filter activates by pressing the top button on the sprayer. 3 NOTE: Use the 1/4" to 3/8" connector if you have a 3/8" tube. 4 3/8 filter hose (need to buy seperately) 1 2 3 Connect the 3/8 in.
Step 4. Attach the counterweight Install the weight on the marked area of the spray hose.
Step 5. 1/4 Filter Connection (optional-sold separately) Thread the nut on the supply line onto the outlet of the water supply valve and tighten with a wrench. Do not overtighten.
Step 6. 3/8 Filter Connection (optional-sold separately) Thread the nut on the supply line onto the outlet of the water supply valve and tighten with a wrench. Do not overtighten.
Step 7. Connect the waterlines Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with wrench. Do not overtighten. 1 2 NOTE: Please make sure filter washers are installed before connecting to the main valve. Step 8. Flush and check for leaks Pull hose assembly out of spout and remove spray head by unscrewing from hose in a counterclockwise direction. Hold the end of the hose down into the sink and turn the faucet on to the warm position.
Replacement Parts Replacement Parts List Finish/Color Part # 1. Sprayer Head CH,SFS,MB,BG* KP46035 2. Sprayer Hose CH,SFS,MB,BG* KP46036 CH,SFS,MB,BG* KP46027 Assembly 3. Spring 3 KP46037 4. Sprayer Seat 5. Sprayer Support 5 CH,SFS,MB,BG* KP46028 6. Handle Assembly CH,SFS,MB,BG* KP46029 7. Cartridge Cover CH,SFS,MB,BG* KP46041 Assembly 4 2 8. Locking Nut 9 8 7 10. Base Seat Assembly 1 22 10 11 12 25 13 6 16 17 14 20 KP46042 9. Cartridge KP46012 CH,SFS,MB,BG* KP46004 12.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or cartridge needs to be reseated. Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench.
Codes/Standards Applicable: NSF/ANSI 372 UP NSF/ANSI/CAN 61: Q ≤ 1 UP C C R C ASME A112.18.1 1.8GPM 6.8L/min maximum C R Faucet Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
How to Make a Warranty Claim If you are a consumer purchaser, please contact a Kraus Customer Service Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
