INSTALLATION MANUAL Forteza™ Series Granite Kitchen Sink KGD-50 / KGD-52 / KGD-54 / KGU-55 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Please note: • KGUs can be installed undermount only (Option B) • KGDs can be installed topmount & undermount (Options A & B) Prior to Installation: • Make sure that you have all necessary parts by checking the parts list.
Tools and Required Materials Adjustable wrench J Safety Goggles Drill Hammer Hole Saw Phillips screwdriver Silicone Sealant Silicone Adhesive Masking Tape Jig Saw Hex wrench Pencil Tape Measure NOTE: Specialized tools may be necessary to install Kraus granite sinks with I countertop materials other than wood, marble, or granite D Parts List • Cut-Out Template • Mounting Hardware • Drain 3 Screwdriver
Hardware (Included) Kit for Undermount Installation Kit for Drop-In Installation Important • Instructions may vary depending on countertop material. Read all instructions carefully, and ensure that counters are compatible with sink installation before proceeding • Follow the plumber’s code and builder’s code effective in your area • Shut off water valves prior to installation • Open sink packaging and verify that the sink is in perfect condition.
Dimensions 15 5/16'' 22'' 17 1/8'' 16 1/16'' 22'' 18 1/2'' 18 3/16'' 14 1/4'' 12 7/8'' KGU-55 31 3/4” x 19 1/8” ” x 9 1/2” Min Cabinet Size: 36” Drain Model #: ST-1G 5 9 11/16'' 9'' 9 1/2'' 8 13/16'' 33'' KGD-50 33” X 22” X 9 1/2” Min Cabinet Size: 36” Drain Model #: ST-2 x (2) 14 1/4'' 33'' KGD-52 33” X 22” 9 3/4” Min Cabinet Size: 36” Drain Model #: ST-2 x (2) KGD-54 33” x 22” x 9 5/8” Min Cabinet Size: 36” Drain Model #: ST-1G
Option A: DROP-IN INSTALLATION 1. Trace Opening • • • • • • • • Locate the drop-in template in the box Cut carefully along the dotted lines. Keep the inside portion of the template. It contains important information concerning care and maintenance for your new sink Place the template on the counter, in the location where you will be installing the sink. When placing the template, note the location of cabinet doors and panels to ensure that they are compatible with sink installation.
2. Cut Opening • • • • • 7 Using the drill, make a small starting hole of about ½” on the inside of the cutting line Drill a second time in the same hole with a larger bit to enlarge the hole so that the jigsaw can be inserted properly Put masking tape on the outer side of the cutting line.
3. Add Additional Faucet Hole (Optional) • • • Determine the location of the faucet Place the sink upside down on a suitable flat surface Using the 32mm (1 ¼”) diamond hole saw at high power (1500tr. per min), break through in the desired location CAUTION: This procedure will cause the metal saw to become very hot.
4. Install Sink • • • • • • • • Clean and dry the surface around the opening of the sink Verify that the sink fits correctly in the opening. The edge of the sink must sit on the counter Turn the unit upside down to apply sealant.
· Repeat the some procedure for the Installation of the second draining hole. Note : Plumber putty is not required for the installation of these 5. Install Drain drains.
Option B - UNDERMOUNT INSTALLATl ON 1. Trace Opening • • • • • 11 Locate the undermount template in the box Cut carefully along the dotted lines. Keep the inside portion of the template. It contains important information concerning care and maintenance for your new sink Place the template on the counter, in the location where you will be installing the sink. When placing the template, note the location of cabinet doors and panels to ensure that they are compatible with sink installation.
2. Cut Opening • • • • Using the drill, make a small starting hole of about 1/2” on the inside of the cutting line Drill a second time in the same hole with a larger bit to enlarge the hole so that the jigsaw can be inserted properly Put masking tape on the outer side of the cutting line.
3. Add Additional Faucet Hole (Optional) • • • Determine the location of the faucet Place the sink upside down on a suitable flat surface Using the 32mm (1 ¼”) diamond hole saw at high power (1500tr. per min), break through in the desired location CAUTION: This procedure will cause the metal saw to become very hot.
4. Install Sink • • • • • • • • • • • Turn the sink upside down. Align the sink with the cutting line on the counter Using a pencil, mark 10 spots around the frame at a distance of about 1” (25.4mm) from the edge of the sink For a solid installation, it is recommended that all 10 mounting clips are used Drill ¼” fixation holes at a depth of 3/8” in the indicated location Insert the brass inserts by tapping them into the holes, split end first Thoroughly clean the top portion of the sink edge.
4.
into place. · Install the basket on top of the drain installation. · Repeat the some procedure for the Installation of the second draining hole. 5. Install Drain • • • • Note : Plumber putty is not required for the installation of these drains.
6. Install Pipes • • Install the faucet following the manufacturer’s instructions Make proper water and waste pipe connections 1 2 ST-1G / ST-2 Maintenance Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the sink. Do not leave sharp objects on the surface of the sink for an extended period of time.
Codes/Standards Applicable: Kitchen Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.
If you are a homeowner please contact a Kraus Customer Service Representative at: If you are an Authorized Partner please contact a Partner Support Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.