INSTALLATION GUIDE Single Lever Vessel Glass Waterfall Bathroom Faucet KGW-1700 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone • Place bucket under angle stops.
Diagram and Parts List 1 2 3 4 5 8 9 6A 6B 6C 6D 7 3
11 Diagram and Parts List 12 13 Tools you will need: 1. Decorative Ring 2. Glass Disc 3. Lever 4. Seal for Glass Disc 1 5. Faucet Body Adjustable Wrench 6. Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nut 2 3 4 5 6 7 8 (D) Mounting Screws 7. Hot & Cold Waterlines (2) Phillips Screwdriver 8. Hex Wrench 9.
Dimensions 7 1/8" (181mm) 12.5° 12.5° (7. 22 1/16" (560mm) 2 1/8" (54mm) 2 5/16" (59mm) 1/16"~1 3/4" (1mm~44mm) " 3/8 m 6"~ .8m 5/1m~8 2m 1 1/4"-18UNEF-2A 12.
Dimensions 7 11/16" (195mm) 12.5° 12 11/16" (322mm) 11 1/4" (286mm) 10 7/16" (265mm) " 3/8 m 6"~ .8m 5/1m~8 2m (7. 12.5° " 5/8 ) 2 m Ø 7m 6 (Ø 58.
Step 1: Remove Mounting Hardware Remove mounting hardware (6A, B, C, & D) from the mounting pipe 1 6A 6B 6C 6D 5 Step 2: Remove Decorative Ring Remove decorative ring (1) from faucet body (5) 1 1 6A 6B 6C 6D 5 5 7 2 5
Step 3: Install Glass Disc Install glass disc (2) on faucet body (5). Secure it using decorative ring (1) 1 1 NOTE: Hand-tighten only (decorative ring) 2 5 6A 6B 6C 6D 5 Step 4: Install Faucet 5 red Line Hot blue Line Cold Insert faucet body (1) into the hole on the countertop.
Step 5: Secure Mounting Hardware Adjust direction of faucet body (5). Tighten mounting nut (6C) until snug. Tighten mounting screws (6D) to nut with a Phillips head screwdriver until snugred Line 1 2 5 Hot Step 6: Connect Waterlines to Main Valve blue Line red Line Hot blue Line Cold 9 Cold Connect hot and cold waterlines (7) to the angle stops. Tighten with a wrench until snug.
Step 7: Flush Faucet Turn water on for a minute to ensure proper water flow Open Hot Cold 10
Replacement Parts 10 Hexagon Nut 9 11 1A 1. (A) Decorative Ring (B) O-ring 12 2. Glass Disc 3. Lever 4. Seal for Glass Disc 5. Locking Nut 6. Cartridge 7. Flow Restrictor 8. Hot & Cold Waterlines 9. Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nut (D) Mounting Screws 8 2 3 4 Hot Water 5 10 6 7 9A 9B 9C 9D 10. Hex Wrench Close 25˚ 1B 13 90˚ Push Open Left Hot Water Care & Maintenance *To keep the product clean & shining, follow the steps below: 1. 2. 3. 4.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle Locking nut has come loose Unscrew the decorative ring (by hand) and remove the glass disc. Loosen set screw with a hex wrench located underneath lever and remove lever.
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.