Instructions / Assembly

12
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under the
handle
Locking nut has come
loose
Unscrew the decorative
ring (by hand) and
remove the glass disc.
Loosen set screw with
a hex wrench located
underneath lever and
remove lever. Tighten
locking nut with a
reversible wrench
Water will not shut off
completely
Cartridge may be
defective
Unscrew decorative
ring (by hand) and
remove glass disc.
Loosen set screw with
a hex wrench located
underneath lever and
remove lever. Unscrew
locking nut with a
reversible wrench.
Remove ceramic disc
cartridge. Check for
cracks
Drain is leaking Washers may be
compromised or
installed incorrectly
Check washers to make
sure they are installed
correctly and not
cracked