INSTALLATION GUIDE Stainless Steel Farmhouse Kitchen Sink KHF200-30 / KHF200-33 / KHF200-36 KHF203-33 / KHF203-36 KHF204-33 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Inspect the sink prior to installation to make sure the sink has not been damaged during shipping • Use the cut-out template provided by Kraus • Observe all plumbing and building codes according to your state requirement • Additional floor and wall preparation may be required to avoid damaging the product • Make sure to purchase the correct cabinet for your farmhouse sink.
I Tools you will need: Hex wrench Drill Phillips Screwdriver Tape Measure Silicone Sealant Silicone Adhesive Jig Saw B Hex wrench Acetone Adjustable wrench Pencil Screwdriver Tools You Will Need Phillips screwdriver I Phillips screwdriver Silicone Sealant Safety Goggles Step9 J J F Adjustable wrench Level NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite D Parts List • Cut-Out Templ
Dimensions KHF200-36 27” 686mm 27” 686mm 29-3/4” 756mm 29-3/4” 756mm 11-5/8” 295mm 11-5/8” 295mm 11-5/8” 295mm 17-3/8” 442mm 9” 229mm 32-7/8” 855mm 10” 254mm 9” 9” 229mm 229mm 35-7/8” 911mm KHF203-33 32 7/8” x 20 3/4” x 10” Min Cabinet Size: 36” Matching Grid: KBG-200-33-1 and KBG-200-33-2 Drain Model #: BST-1 & ST-1 16” 406mm 16” 406mm 20-3/4” 527mm 13” 330mm 19” 483mm 10”10” 254mm 254mm 32-7/8” 835mm 32-7/8” 835mm KHF204-33 20-3/4” 20-3/4” 527mm 527mm 16”16” 406mm 406mm KHF203-36 KHF
1.
2. Cut Cabinet Front • Measure height of apron front. Add 1/16” to the dimension when you mark base cabinet front cutout. Use jigsaw to cut 3. Install Sink • Place sink in opening.
4. Cut Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
5. Installing Plumbing Fixtures • Connect drain, trap to drain and water supply connections to the faucet according to manufacturer’s instruction.
Codes / Standards Applicable: Kitchen Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.
Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
