I N S TA L L AT I O N MA N UA L Farmhouse Stainless Steel Sink KHF200-30 / KHF200-33 / KHF200-36 KHF203-33 / KHF203-36 KHF204-33 www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Inspect the sink prior to installation to make sure the sink has not been damaged during shipping • Use the cut-out template provided by Kraus • Observe all plumbing and building codes according to your state requirement • Additional floor and wall preparation may be required to avoid damaging the product • Make sure to purchase the correct cabinet for your farmhouse sink.
I Tools you will need: Phillips screwdriver Hex wrench Silicone Sealant Safety Goggles Drill Phillips Screwdriver Tape Measure Silicone Sealant Silicone Adhesive Jig Saw B Hex wrench Acetone Adjustable wrench Phillips screwdriver Pencil Screwdriver Tools You Will Need I J J F Adjustable wrench NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite D Parts List • Cut-Out Template • Bottom G
Dimensions KHF200-36 27” 686mm 27” 686mm 29-3/4” 756mm 29-3/4” 756mm 11-5/8” 295mm 11-5/8” 295mm 11-5/8” 295mm 17-3/8” 442mm 9” 229mm 32-7/8” 855mm 10” 254mm 9” 9” 229mm 229mm 35-7/8” 911mm KHF203-33 32 7/8” x 20 3/4” x 10” Min Cabinet Size: 36” Matching Grid: KBG-200-33-1 and KBG-200-33-2 Drain Model #: BST-1 & ST-1 16” 406mm 16” 406mm 20-3/4” 527mm 13” 330mm 19” 483mm 10”10” 254mm 254mm 32-7/8” 835mm 32-7/8” 835mm KHF204-33 20-3/4” 20-3/4” 527mm 527mm 16”16” 406mm 406mm KHF203-36 KHF
1.
2. Cut Cabinet Front • Measure height of apron front. Add 1/16” to the dimension when you mark base cabinet front cutout.
3. Install Sink • Place sink in opening.
4. Cut Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
5. Installing Plumbing Fixtures • Connect drain, trap to drain and water supply connections to the faucet according to manufacturer’s instruction.
Codes/Standards Applicable: HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro Representative at: Kraus USA, Inc.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.