VERSION 1.
VERSION 1.
VERSION 1.
VERSION 1.
I N S TA L L AT I O N MA N UA L Single Lever Pull Out Kitchen Faucet KPF-1602 www.kraususa.com I toll free: 1.800.755.0703 I © 2013-2014 Kraus USA Inc.
Congratulations on your new Kraus purchase! We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you are completely satisfied with your Kraus experience. We welcome any questions or comments you may have, and look forward to assisting you in the future. For more information about Kraus products, please visit our website at: www.kraususa.com. In order to allow us to serve you better, we recommend registering your new Kraus product at: www.kraususa.
KPF-1602 Diagram and Parts List Included Parts: 1. Faucet Body 11 2. Base 3. Base O-Ring 10 12 4. Plastic Washer - Optional 15 (Top Mount Sinks Only) 13 9 10 5. Rubber Washer 6. Metal Washer 7. Mounting Nut 8. Mounting Screws (2) 11 9. Spray Head 10. Spray Hose 11. Spring 12 12. Sprayer Holder 13. Thumb Screws (2) 13 14. Hot and Cold Waterlines 15.
15 32 3/32” 815 32 3/32” Dimension Drawings Max1 3/8” Max1 3/8” Max35 8 17/32” 8 17/32” Max35 279 10 31/32” 279 10 31/32” 194 194 217 217 7 5/8”7 5/8” Ø35~Ø38 Ø35~Ø38 Ø1 3/8~Ø1 Ø1 3/8~Ø1 1/2” 1/2” Hot Water Hot Water Cold Water Cold Water Safety Tips • If soldering the water connections when installing the faucet, remove the O-rings, cartridges, and washers before applying any heat • Protect your eyes with safety glasses when cutting or soldering m m m mm 90me 90m e c not overtighten fixing
Ø35~Ø38 Ø1 3/8~Ø1 1/2” Cold Water Hot Water Faucet Installation Procedures Installation Method 1 m 0m m 0m n9 tha s s Le 5” ~3. 815 32 3/32” M 9 nce ista d um 5” ~3. inim 7 5/8” Max1 3/8” Max35 194 When possible, the minimum distance between the faucet hole1 2 and the wall should be 3.5”. 3 Ø35~Ø38 Ø1 3/8”~Ø1 1/2” Ø35~Ø38 30˚ Ø1 3/8~Ø1 1/2” Cold Water 4 6 5 7 8 Installation Method 2 (optional) m 0m n9 tha s s Le 5” ~3.
Step 1 1 2 3 Ø35~Ø38 Ø1 3/8”~Ø1 1/2” 4 5 6 7 Remove the mounting screws 1 (8), mounting nut (7), metal washer (6), rubber washer (5), and plastic washer (4) from 2 3 the main faucet (1). The base (2) and base O-ring (3) should remain on the faucet4 body.
10 Step 3 9 11 10 11 1 12 After adjusting the direction 12 of the faucet body (1), 13 tighten the mounting nut (7) until snug and tighten the mounting 1 screws (8) to the nut with a Phillips head screwdriver until snug. 23 7 8 4 6 8 5 7 Step 4 10 11 12 13 1 Close 25˚ Situate the sprayer holder (12) onto the faucet body (1), then Open connect the sprayer hose (10) to the faucet body (1) and finger tighten.
Step 5 10 Hexagon Nut 9 11 12 13 Hot Water Cold Water Step 6 xagon Nut 3 Tighten the hexagon nut of sprayer hose (10) with a wrench until snug. Insert the spring (11) into sprayer holder (12). After adjusting the direction of sprayer holder (12) to the desired location, tighten thumb screws (13). Connect sprayer (9) to the sprayer hose (10); finger-tighten, then tighten with wrench until snug.
Water agon Nut 12 Water 13 Usage How to operate the handle: Close 25˚ Hot Cold Water 90˚ Water Open Left Hot Water Hot Cold 1. Water handle Water Raise the lever to turn on the water. Push down to turn off. 2. Turn the lever handle to the left to increase hot water flow, turn to the right to increase cold flow. 1. To activate sprayer, turn on water with lever and squeeze sprayer.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle Locking nut has come loose Unscrew the lever on the handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand.
Codes/Standards Applicable: Specified model meets or exceeds the following: ANSI/ASME A112.18.1, cUPC, AB1953 KRAUS Brand Lavatory Faucets Limited Lifetime Warranty KRAUS is proud to offer its customers the strongest, most durable ceramic cartridges in all of its solid brass Lavatory Faucets. KRAUS guarantees that all of its products are free of defect in materials and craftsmanship. All KRAUS BRAND Lavatory Faucets carry a limited lifetime warranty from the original date of purchase.
www.kraususa.
