Instructions / Assembly

8
t the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
1
8
Step 3
2. Insert the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
4
5
6
7
8
9
3. After adjusting the direction of the faucet body (1), tighten the
mounting nut (8) until snug and tighten the mounting screws (9) to
Step 4
Step 3
t the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
1
8
Step 3
2. Insert the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
4
5
6
7
8
9
3. After adjusting the direction of the faucet body (1), tighten the
mounting nut (8) until snug and tighten the mounting screws (9) to
Step 4
Step 3
Insert faucet body (A) into hole
on deck or sink with base (C) and
base o-ring (D) attached. Attach
mounting hardware assembly (E)
Adjust faucet body (A). Secure
mounting hardware (E) with
wrench and Phillips head
screwdriver
E1
C
D
E2
E3
A
A
E
9
Step 6
Hot
Water
Cold
Water
Installer Tip
F
E
G
F
Hexagon Nut
Hot
Water
Cold
Water
Close
Open
Left
Hot Water
Push
25˚
90˚
Step 5
KPF-1602.indd 9 2016-08-09 3:39 PM
A
J
Step 3
Step 4