INSTALLATION GUIDE Single Lever Pull-Out Kitchen Faucet KPF-1621 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation • • • • Make sure that cold and hot water lines are turned off Wrap all threaded connections with Teflon tape. Always wrap in a clockwise direction Cover your drain to avoid losing parts Do not disassemble the main faucet body, as it has been installed & commissioned correctly & precisely before delivery from the factory • To keep the faucet from jamming, flush the water pipe before installation • Using condition: Working pressure at 0.05-1.
KPF-1621 Diagram and Parts List 9 Included Parts: 8 1 11 10 10 11 9 2 13 7 13 11 Tools you will need: 1 Wrench 1 3 12 2 12 3 4 5 6 7 10 1. Faucet Body 2. Base O-Ring 3. Rubber Washer 4. Metal Washer 5. Mounting Nut 6. Mounting Screws (2) 7. Weight 8. Spray Head 9. Spray Hose 10. Hot and Cold Waterlines (2) 11.
Dimension Drawings 249 mm 11 9/16” 20° 231mm 9 3/32” Ø35~Ø38 Ø3/8”~Ø1 1/2” Hot Water Cold Water Safety Tips • If soldering the water connections when installing the faucet, remove the O-rings, cartridges, and washers before applying any heat • Protect your eyes with safety glasses when cutting or soldering 4
Max35 Max1 3/8” 475 mm 18 3/4” Dimension Drawings Cold Water Safety Tips • Do not overtighten fixing screws/nuts.
Faucet Installation Methods Installation Method 1 md imu ” 3.5 The minimumandistance between the th s s faucet hole Le and the wall should be 3.5” 30˚ Min .5” 3 ce n ista Installation Method 2 an s th ” If the distance between the faucet hole 3.5 and the wall is less than 3.
Faucet Installation Steps Step 1 2 3 4 5 6 Remove mounting screws (6), mounting nut (5), metal washer (4), and rubber washer (3) from the 1 faucet body (1) 8 ~Ø3 Ø35 1/2” ~Ø1 ” 8 / 13 1 8 ~Ø3 Ø35 ” 1 1/2 ”~Ø 1 3/8 Ø Step 2 Ø 2 3 4 5 6 2 3 4 5 6 Connect spray head (8) to spray hose (9) and tighten firmly.
Step 3 After adjusting the direction of the faucet body(1), tighten the mounting nut (5) until snug and tighten the mounting screws (6) to the nut with a Philips head screwdriver 5 6 W Step 4 7 Connect the spray hose (9) to the supply line and tighten with a wrench until snug, then install the weight (7) at the lowest point (horizontally) on the spray hose (9) join hose Hot Cold Water Water 7 8
Step 5 Connect hot and cold waterlines (10) to the angle stops and tighten with a wrench until snug, then unscrew spray head (8), hold the tip of the spray hose (9) and turn on the faucet to flush any debris 9
Usage join hose How to Operate the Handle Hot Cold Water Water 7 1. Pull the lever to the right to turn on the water. Push to the left to turn off 2.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle Locking nut has come loose Remove the index button at the top of the handle. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand.
Codes/Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
