R INSTALLATION GUIDE StandardPRO Thick Deck Stainless Steel Top Mount Kitchen Sink KHT301-18 / KHT301-18/5.5 / KHT301-25 / KHT300-33 / KHT302-33 / KHT301-22L / KHT301-25L www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure that you have all necessary parts by checking the parts list.
Tools you will need: Safety Goggles Gafas protectoras Drill Taladro Silicone Adhesive Adhesivo de silicona Jig Saw Sierra caladora Phillips Screwdriver Destornillador de estrella (Phillips) Putty Knife Espátula Tape Measure Cinta métrica Pencil Lápiz Scissors Tijeras Screwdriver Destornillador NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with countertop materials other than wood, marble or granite.
Dimensions: Typical note: *= Special Order R 3/8" (10mm) (2.5mm) 18" (457mm) R 1/8" 16" (406mm) 18" (457mm) 10" (2.5mm) (254mm) 10" 14" (356mm) (90mm) 33" (838mm) R 3/8" R 3/8" (10mm) (10mm) Model #: KHT301-18/5.5* Sink Dimensions: 18” x 18” x 5.5” Min Cabinet Size: 20” Matching Grid: KBG-301-18 Drain Model #: ST-1 Drain Cap #: STC-2 20" 22" (559mm) (2.5mm) R 3/8" R 1/8" (10mm) (4mm) 18" (457mm) 22" (559mm) 4 1/2" (508mm) (0mm) R 1/8" (2.5mm) 12" 16" 18" (457.
Dimensions: Ø1 3/8" (0mm) (2.5mm) 25" (635mm) R 3/8" 22" (559mm) 18" (457mm) (2.
Step 1. Position Template · · Check the cut-out template against the actual sink to ensure a proper sized cut-out. Place the cut-out template in the desired location on the countertop. NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
Step 2. Trace Template · Trace template on countertop with a pencil.
Step 3. Cut Countertop · Cut the opening in the countertop by carefully following the traced line. NOTE: Please use the appropriate saw that best fits your countertop material.
Step 4. Attach Mounting Hardware · · Attach mounting hardware to the prongs protruding from the underside of the sink rim. Make sure the hooked side of the mounting clip is facing away from the sink.
Step 5. Apply Silicone or Plumber's Putty · · Clean and dry the surface around the opening of the sink. Turn the unit upside down to apply sealant. Apply silicone-based sealant (not included) underneath the edge of the sink.
Step 6. Secure Sink to Countertop · · · · Insert the sink into the opening, check the alignment of the sink to the cutout in the countertop and press firmly. Tighten the screws in the front of the sink, followed by the ones in the back and on the sides of the sink. Remove excess silicone-based sealant. Allow sealant to set for 30-60 minutes.
Step 7. Install Plumbing Fixtures · · Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer's instructions. Run water into sink and check for leaks. Maintenance Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the sink.
Codes/Standards Applicable UP C C R Kitchen Sink Warranty / Garantía del fregadero de cocina Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Kitchen Sink" in its original location. The warranty is non-transferable.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. Esta garantía no cubre los productos antediluvianos, discontinuados o de exhibición, ya sea que dichos artículos se compren en puntos de venta de descuento, concesionarios no autorizados y/o se vendan en liquidación.
If you are a homeowner please contact a Kraus Customer Service Representative at / Si usted es propietario de una casa, póngase en contacto con un representante de servicio al cliente de Kraus en: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.