INSTALLATION GUIDE Handmade Stainless Steel Undermount Kitchen Sink KHU100-26 / KHU100-28 / KHU100-30 / KHU100-32 / KHU101-14 / KHU101-17 / KHU101-20 / KHU101-21 / KHU101-22 / KHU101-23 / KHU102-33 / KHU103-32 / KHU103-33 / KHU104-33 / KHU105-32 / KHU110-27 / KHU111-24 / KHU111-25 / KHU121-23 / KHU122-23 / KHU123-32 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list.
I J Phillips screwdriver Hex wrench Silicone Sealant Safety Goggles Drill Phillips Screwdriver Putty Knife Silicone Sealant Silicone Adhesive Jig Saw B Hex wrench Scissors Phillips screwdriver Adjustable wrench Tape Measure Pencil Screwdriver Tools You Will Need J Adjustable wrench F Tools you will need: NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite I Parts List • Cut-Out Templat
Dimensions 28” 32” 813mm 762mm 10” 254mm 10” 10” 10” 254mm 254mm 254mm 813mm 18” 18” 15” 305mm 381mm 457mm 356mm 432mm 508mm 10” 10” 254mm 254mm 20” 17” 8” 457mm 16” 17” 15” 432mm 381mm 18” 406mm KHU100-32 32” x 17” x 10” Min Cabinet Size: 36” Matching Grid: KBG-100-32 Drain Model #: BST-1 457mm 16” 405mm KHU100-30 30” x 18” x 10” Min Cabinet Size: 33” Matching Grid: KBG-100-30 Drain Model #: BST-1 204mm 483mm 30” 762mm 32” 30” KHU101-14 14” x 18” x 8” Min Cabine
Dimensions 533mm 559mm 10” 254mm 10” 10” 10” 10” 254mm 254mm 813mm 254mm 10” 10” 254mm 254mm 305mm 32” 832mm KHU102-33 32 3/4” x 19” x 10” Min Cabinet Size: 36” Matching Grid: KBG-102-33-1 and KBG-102-33-2 Drain Model #: BST-1 & ST-1 12” 457mm 378mm KHU103-32 32” x 19” x 10” Min Cabinet Size: 36” Matching Grid: KBG-103-32-1 and KBG-103-32-2 Drain Model #: BST-1 & ST-1 Drain Cap: STC-2 × 2 19” 17” 432mm 19” 482mm 483mm 19” 432mm 18” 14-7/8” 14-7/8” 378mm 32-3/4” 832mm 32”-3/4 K
KHU104-33 KHU103-33 327mm 327mm 10” 19” 17” 457mm 16” 16” 406mm 406mm 18” 457mm 18” 25” 13-1/2” 13-1/2” 343mm 635mm 343mm 27” 686mm 10” 10” 10” 254mm 254mm KHU105-32 30 1/2” x 20” x 10” Min Cabinet Size: 36” Matching Grid: KBG-105-32-1 and KBG-105-32-2 Drain Model #: BST-1 & ST-1 254mm 30-1/2” 30-1/2” 775mm 482mm KHU104-33 32 3/4” x 19” x 10” Min Cabinet Size: 36” Matching Grid: KBG-104-33-1 and KBG-104-33-2 Drain Model #: BST-1 & ST-1 775mm 254mm 254mm 10” 254mm 10” 10” 10” 10”
Dimensions 22” 533mm 25” 610mm 23” 23” 584mm 635mm 10” 10” 254mm 254mm KHU121-23 23” x 18 3/4” x 10” Min Cabinet Size: 27” Matching Grid: KBG-121-23 Drain Model #: BST-1 15” 381mm 15” 381mm 17” 381mm 432mm 17” 432mm 15” 18” 20” 20” 508mm20” 508mm 18” 508mm 457mm 457mm18” 457mm 476mm 426mm 16-3/4" 16-3/4” 426mm 18-3/4” 18-3/4” 476mm KHU111-25 KHU123-32 25” x 18” x 10” Min CabinetKHU123-32 Size: 30” Matching Grid: KBG-111-25 Drain Model #: ST-1 Drain Cap: STC-2 24” x 18” x 10” Min Cabinet
DETERMINE REVEAL TYPE DETERMINE REVEAL TYPE 1.
3. Trace Template • Trace template on countertop with a pencil Step3 Step3 4.
Determine location for mounting brackets; space 3/8”POSITIVE 1/8”NEGATIVE USHED/ZERO Centerline 5. Set up Mounting Brackets • Turn countertop over and align sink with countertop. Decide location for mounting brackets • Mounting holes should be ½” from edge of sink Step5 1/2" (13mm) Step6 Step5 6.
7. Install Anchors Step6 • Insert anchors into drilled holes and lightly tap with a hammer until flush 1/2 Step7 8. Secure Sink to Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
Step8 Step9 9. Attach Mounting Hardware • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip NOTE: Use acetone or • Allow sealant to set for 30 – 60 minutes rubbing alcohol to remove any excess sealant Step8 Step9 10. Install Plumbing Fixtures • Connect drain to sink. Connect trap to drain.
Codes / Standards Applicable: Kitchen Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.
Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
