I N S TA L L AT I O N MA N UA L Zero-Radius Handmade Stainless Steel Kitchen Sinks (Pax™ and R0 PRO™ Series) KHU15 & KHU15C / KHU19 & KHU19C / KHU23 & KHU23C / KHU24L & KHU24CL / KHU29 & KHU29C KHU32 & KHU32C / KHU322 & KHU322C www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV.
Thank you for purchasing Kraus We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you are completely satisfied with your experience. We welcome any questions or comments you may have, and will be glad to assist you in the future. For more information about Kraus products, please visit our website at: www.kraususa.
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list.
Phillips screwd Silicone Sealant Safety Goggles Drill Phillips Screwdriver Putty Knife Silicone Sealant Silicone Adhesive Jig Saw Adjustable wrench Tape Measure Pencil Phillips screwdriver Tools You Will Need Scissors Screwdriver NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite D Parts List • Cut-Out Template • Mounting Hardware • Bottom Grids NOTE: Bottom grids and drains are not includ
17" 18-1/2" 17" 18-1/2" 17" 18-1/2" Dimensions 13" 21" 22-1/2" 10" 10" 17" 18-1/2" 95° 95° 95° 17" 17" KHU23 & KHU23C 22.5” x 18.5” 10” 18-1/2" 18-1/2" KHU19 & KHU19C 18.5” x 18.5” x 10” 17" KHU15 & KHU15C 14.5” x 18.5” x 10” 27" 30" 24" 28-1/2" 31-1/2" 10" 12" 95° 95° 95° KHU32 & KHU32C 31.5” x 18.5” x 10” 18-1/2" KHU29 & KHU29C 28.5” x 18.5” x 10” 17" KHU24L & KHU24CL 24” x 18.
DETERMINE REVEAL TYPE 1.
Step1 2.
Step2 3.
Step3 4.
Determine location for mounting brackets; space 3/8 3/8”POSITIVE 1/2 5. Set up Mounting Brackets 1/8”NEGATIVE • Turn countertop over and align sink with countertop. Decide location for mounting brackets • Mounting holes should be ½” from edge of sink FLUSHED/ZERO Centerline Step5 1/2" (13mm) Step5 6.
7. Install Anchors Step6 • Insert anchors into drilled holes and lightly tap with a hammer until flush 1/2 Step7 8. Secure Sink to Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
9. Attach Mounting Hardware Step8 • Attach mounting hardware to secure bowl.
Step9 10. Install Plumbing Fixtures • Connect drain to sink. Connect trap to drain.
Codes/Standards Applicable: KRAUS LIMITED LIFETIME WARRANTY This product has been manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is not transferable, between homes or owners and is only applicable to residential use.
NON-APPLICABILITY OF THIS WARRANTY By the purchase and use of our products, you agree that Kraus is not liable for incidental, consequential or special damages associated with the return, replacement, installation or use of your product.
www.kraususa.