I N S TA L L AT I O N MA N UA L Bolden™ Single Handle Commercial Kitchen Faucet KPF-1610 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List 7 8 6 1 9 2 3A 3B 3C 3D 4 5A 5B
12 Diagram and Parts List 1 2 3 4 5 6 7 8 1. Spray Head 2. Faucet Body 3. Mounting Hardware A. Rubber Washer B. Metal Washer C. Mounting Nut D. Mounting Screws 4. Supply Hose 5. Hot & Cold Waterlines A. Hot B. Cold 6. Hose 7. Washer 8. Weight 9.
Faucet Installation Procedure Installer Tip: Shut off main water supply before installing new faucet
ght Step1: Remove mounting hardware Step 1: Remove mounting hardware Step2: Install faucet and mounting hardware Remove the mounting screws (3D), mounting nut (3C), metal (3B) and rubber washer (3A) from the mounting pipe 3A 3B 3C 3D Step2: Install faucet and mounting hardware Step 2: Install faucet and mounting hardware Step4: Attach spray hose and counterweight Step5: Connect angle valve Insert faucet body (2) into hole in countertop.
Step4: Attach spray hose and counterweight Step3: Secure mounting hardware Step 3: Secure mounting hardware Adjust direction of faucet body (2) so that handle is on right side of faucet. Tighten mounting nut (3C) until snug. Tighten mounting screws (3D) with Phillips screwdriver until snug 3C 3D Step4: Attach spray hose and counterweight Step5: Connect angle valve Step 4: Attach spray hose and counterweight Connect spray hose (6) to supply hose (4).
se and counterweight Step 5: Connect waterlines Step5: Connect angle valve Connect waterlines(5A&B) to angle stops. Tighten Step 7: Flush spray hose both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks 5A 5B Step 6: Flush spray hose Step 7: Flush spray hose 6 Remove spray head (1) from spray hose (6). Hold tip of spray hose (6).
Replacement Parts Replacement Parts 10 5 4 6 9 Hexagon Nut 11 3 2 12 13 1 22 26 7 23 8 9 28 10 16 15 24 27 25 29 17 18 19 Close 25˚ 90˚ 21 Open 20 Left Hot Water 14 13 11 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or cartridge needs to be reseated Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand.
Maintenance - Cartridge Replacement Step 1: Remove the handle button from the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge Step 3: Place the new cartridge in the handle seat.
Codes/Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75GPM 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages. This warranty does not cover Marine or Outdoor Installation.
In requesting warranty service, please be ready to provide: 1. Proof of purchase. 2. A description of the problem. Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance www.kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.