Installation Guide

ManualsBrandsKRAUS ManualsKitchenSingle-Handle Kitchen Faucet with Pre-Rinse Sprayer and Pot Filler in Spot Free Antique Champagne Bronze/Matte Black

1

2

3

4

5

6

7

8

9

8

Step 5. Flushing and checking for leaks

Pull the hose assembly out of the

spout and remove the spray head

by unscrewing it from the hose in

a counterclockwise direction. Be

sure to hold the end of the hose

down into the sink and turn the

faucet on to the warm position

where it mixes hot and cold

water.

Flush the water lines for one

minute. This flushes away any

debris that could cause damage

to internal parts. Check for leaks.

Reinstall the spray head by hand

tightening it back onto the spray

hose.

1

2

NOTE:

1. Do not lose the rubber washer (1)

when installing the sprayer back on.

2. The magnet end marking with a

black dot should be toward the hose

for correct magnet installation.