Installation Guide

66
Step 1. Remove washer and lock nut
Step 2. Install faucet
Shut off the water supply.
Remove the old faucet. Clean the
mounting surface. Remove
mounting hardware (B) from
faucet body (A).
Insert faucet through hole in sink
or countertop.From underneath
sink, attach the seat (B1), rubber
washer (B2), metal washer (B3),
and nut (B4). Lock nut (B4) into
position by tightening screws (B5).
A
B
B1
B2
B3
B4
B5