Installation Guide

F
B
C
D
F
E
Click
G
a
NOTE: Ensure the 3-way quick connect
assembly and block are installed in the
correct direction, as shown. Push up
until you cannot pull down. You will
hear a click.
(2 N.m
Max)
Step 1. Installing the faucet
Step 2. Securing the faucet assembly
Shut off the water supply. Place the
faucet (B) through the hole in the
countertop. Secure the faucet (B) to the
countertop using the rubber washer (C),
metal washer (D) and mounting nut (E)
provided. Tighten screws (F).
Push the 3-way quick connect assembly
(G) firmly upward and attach it to the
receiving block (a). Pull down
moderately to ensure the connection has
been made.
6