INSTALLATION GUIDE Single Lever Pull Out Kitchen Faucet KPF-2230 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List 7 6 1 2 3A 3B 3C 3D 5 4 3 1. sprayhead 2. faucet assembly 3. mounting hardware A. Rubber Washer B. Metal Washer C. Mounting Nut D.Mounting Screws 4. hose 5. escutcheon 6. hex wrench 7.
1 1/4"-18UNEF-2A 2-1/2-14NPSM-2A 6 1/8" (156mm) Ø 2 3/8" (Ø 60mm) 10 3/16" (258.
Faucet Dimensions 9 3/16" (234mm) 2 1/2" (63.
Step 1: Remove mounting hardware Remove mounting hardware(3) Step 2A: Installing the faucet with deck plate For three-hole installation, deck plate (5), and silicone sealant are required 6
Step 2B: Installing the faucet without deck plate For single-hole installation, deck plate (5), and silicone sealant are NOT required Step 3: Install faucet and mounting hardware Insert the faucet body (2) into the hole on the countertop or deck plate assembly (5).
Step 4: Attach spray hose and counterweight Remove the plastic seal cover from the outlet port prior to pushing the hose adapter onto the same port, you will hear a “click” sound once they are joined. Attach metal weight to hose to prevent hose from twisting and returns hose to proper position. Step 5: Attach supply hose Tighten supply hose ends to faucet shank and water supply source.Note: Hand tighten the supply hose and then tighten 1/4 turn with adjustable wrench.
Step 6: Open water Open the water valve and check for leaks at supply line connection. Step 7: Flush faucet After installing faucet, remove pull-down spray and turn on water to remove any left over debris.
Replacement Parts 1. Metal Handle Assembly 2. Locking Nut 3. Ceramic Disc Cartridge 4. Spout Seal Kit 5. Spout Base 6. Spout 7. Hose Guide 8. Hand Spray w/ Check Valve 9. Supply Pipe-Hot 10. Supply Pipe-Cold 11. Supply Pipe 12. Screen Washer 13. Mounting Hardware 14. Hose Adaptor Assembly 15. Cover Plate & Putty Plate 16. Weight 17. Hex Wrench(H2.5 * 19 mm L * 53 mm L) 18. Supply Hose Care & Maintenance *To keep the product clean & shining, follow the steps below: 1. 2. 3. 4.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM 11 CAUSE ACTION Leakage under the handle Locking nut (4) has come loose Remove index button (2A). Loosen the set screw (2B) with a hex wrench (9). Remove the handle (1) and unscrew cartridge cover (3) by hand.
Maintenance - Cartridge Replacement Step 1: Remove the handle button from the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge Step 3: Place the new cartridge in the handle seat.
Codes / Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.