INSTALLATION MANUAL Oletto™ Single Handle Commercial Style Kitchen Faucet KPF-2631 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
7/8” (22mm) 19.7 º Prior to Installation: • 10 1/8” 8 5/16” Make(257mm) sure you have all necessary (21mm) parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800- ∅ 1 15/16” 775-0703 for a replacement (∅ 50mm) ∅ 1 3/4” • (∅ 45mm) ∅ 1 15/16” (∅ 50mm) • 1 3/8” (35mm) Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
Diagram and Parts List B A I C J D E F G H A. Spray Head G. Weight B. Faucet Body H. Quick Connect C. Deck & Putty Plate I. Hex Wrench D. Supply Hose i1. 2.5mm E. Hot & Cold Waterlines i2. 4mm F. Spray Hose 3 J.
Faucet Dimensions 11" 279mm 4 1/4" 9 1/4" 233mm 562mm 22 1/8” 106.5mm 25 223mm 8 3/4" 181mm 7 1/8" 65 2 1/2" 62mm 1 3/8" 1" 25mm 10 1/4" 260.5mm 35mm 9/16-24UNEF-2B Step 1A: Install base without deck & putty plate Insert base (J) into sink or countertop with “FR↑NT” facing forward.
1B Step 1B: Install base with deck & putty plate Place a bead of clear silicone D sealant (not included) around the edge of the putty plate (C). Secure deck2 & putty plate (C) on sink or countertop. Insert base (J) into hole of deck & putty plate (C) with “ FR↑NT” facing forward.
Step 3: Secure faucet Align arrow on faucet body (B) with arrow on base (J). Attach faucet body (B) to base (J). Secure faucet body (B) by tightening the set screw with 2.5mm hex wrench (i1) Installer Tip: Please loosen set screw from faucet body (B) prior to securing to base (J) Note: “ “ on base should be in alignment with “ “ on faucet body.
Step 4: Connect waterlines to main valve Thread hot & cold waterlines (E) onto angle stops. Tighten with adjustable wrench until snug.
Step 5: Connect quick connect Attach Quick Connect (H) with black end onto spray hose (F) until you hear a click. Attach the other end onto the supply hose (D) until you hear a click.
Step 6: Install Weight Attach weight (G) on the designated mark on the spray hose (F) Designated Mark G F 9
Step 7: Flush Faucet Remove spray head (A). Hold tip of spray hose. Turn faucet on for 1 minute to flush any debris.
Replacement Part List 1. Spray Head 2. Plastic Sleeve 3. Spray Hose 4. Set Screw 5. Catridge 6. Locking Nut 7. Catridge Cover 3 8. Metal Handle 9. A Index Button 2 B Set Screw 4 5 1 6 10. Quick Connect Assembly 7 11. Cover Plate 8 9A 9B 11 12. Putty Plate 13. Base 14. Weight 15. Hex Wrench 14 10 15 13 12 16 (2.5mm) 16.
12 13 Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE Water will not shut off completely Close 25˚ Open Hot Water Water Cold Water Cartridge(5) may need to be adjusted or replaced Remove index button (9B). Loosen set screw (9A) with 2.5mm hex wrench (15). Remove metal handle (8). Remove cartridge cover (7) by hand only. Remove locking nut (6) with an adjustable wrench.
Codes/Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75GPM 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.