R INSTALLATION MANUAL Industrial Bar Faucet KPF-3127 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! R Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
STOP Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. R · Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
Diagram and Parts List 1. 2. 3A. 3B. 3C. 3D. 4. 1 Aerator Assembly Faucet Body Rubber Washer Metal Washer Mounting Nut Mounting Screws Waterlines 2 3A 3B 3C 3D 4 For technical assistance or replacement parts, please contact Kraus R Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.
Faucet Dimensions 7 1/4" (185mm) 4 5/8" (118.7mm) 5 3/4" Ø1 3/8" 2 1/8" (34mm) (54mm) Ø2" (50mm) (38mm) (315mm) Ø1 1/2" 9 1/2" (242.8mm) 12 3/8" (147.1mm) Installer Tip: Shut off main water supply before installing new faucet.
Step 1. Remove mounting hardware Remove the mounting screws (3D), mounting nut (3C), metal washer (3B) and rubber washer (3A) from the mounting pipe. 3A 3C 3B 3D Step 2. Install faucet and mounting hardware Insert faucet body (2) into hole in countertop or deck plate assembly. Install mounting hardware (3A, B, C & D) from underneath the countertop.
Step 3. Secure mounting hardware Adjust direction of faucet body (2) so that handle is on right side of faucet. Tighten mounting nut (3C) until snug. Tighten mounting screws (3D) to nut with Phillips screwdriver until snug. Step 4. Connect waterlines Connect hot and cold copper lines (4) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks. NOTE: Please make sure filter washers are installed before connecting to the main valve.
Step 5. Flush faucet Remove aerator assembly (1) from faucet body (2). Turn faucet on and let the water run for 60 seconds to flush any debris. Step 6. Check for leaks Check for leaks at the connections. Retighten if necessary.
Maintenance - Cartridge Replacement 1 Step 1: Remove the handle button by hand. Loosen the screw with a Phillips screwdriver. Remove the handle and cartridge cap by hand. 2 Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge. 3 Step 3: Place the new cartridge in the handle seat. Secure the cartridge with the locking nut and assemble the handle.
Replacement Parts Replacement Parts List Finish/Color Part # 1. Aerator Assembly SFS, MB, BG** KP44108 2. Spot Seal Kit 1 2 7 6 5 4 3 8 9 10 11 12 KP44109 3. Handle Button SFS, MB, BG** 4. Faucet Handle SFS, MB, BG** KP44033 5. Cartridge Cover SFS, MB, BG** KP44112 KP44032 6. Cartridge Nut KP44111 7. Cartridge KP44110 8. Filter Washer KP44022 9. Base O-Ring KP44102 10. Rubber Washer KP44098 11. Metal Washer KP44099 12. Mounting Nut KP44101 13.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or cartridge needs to be reseated. Loosen set screw with Phillips screwdriver. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench. Water does not shut off completely Cartridge may need to be adjusted or replaced.
Codes/Standards Applicable: NSF/ANSI 372 UP NSF/ANSI/CAN 61: Q ≤ 1 UP C C R C ASME A112.18.1 1.5GPM 5.6L/min maximum C R Faucet Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
How to Make a Warranty Claim If you are a consumer purchaser, please contact a Kraus Customer Service Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
