INSTALLATION MANUAL Natura™ Series White Matte Undermount Bathroom Sink KSU-8MW www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Thank you for purchasing Kraus We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you are completely satisfied with your experience. We welcome any questions or comments you may have, and will be glad to assist you in the future. For more information about Kraus products, please visit our website at: www.kraususa.
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list.
Hex wrench Safety Goggles Drill Phillips Screwdriver Putty Knife Silicone Sealant Silicone Adhesive Jig Saw Adjustable wrench Phillips screwdriver Tape Measure Pencil Tools You Will Need I Scissors Screwdriver NOTE: Specialized tools may be necessary to install Kraus Undermount sinks with countertop materials other than wood, marble, or granite D Parts List (Included) • Cut-Out Template • Mounting Hardware • Cleaning Sponge • Buffing Paper 4 Phillips scre Silicone Sealant J J Adjustabl
Dimensions 21.7” 1.7” 21.7”L x 14.2”W x 4.8”H 21.7” 1.7” 14.2” 14.2” 4.8” 4.
1. Cut Paper Template • Use scissors to cut along the inside line of the paper template 2” (50.8mm Suggested) Finished Wall 2.5” (63.5mm Suggested) Clip Location 322mm 12.7" minimum of 4.5” (114.3mm all for faucet placement ce before cutting) Rim of Lavatory 490mm 19.3" Cut Along This Line m 0m "] .4 2 [R R6 otting template full size: ontal and vertical nsions labeled 2.
Step3 11.61” (295mm) Rim of Lavatory Cut Along This Line 17.7” (450mm) 3.
4. Install Anchors • Flip countertop over and place on a foam pad for protection. Use cutout template to mark the anchor placement on the countertop. Drill 5/16” diameter x 3/8” deep hole in countertop • Place epoxy in the drilled hole.
Rim of Lavatory Cut Along This Line 14.25” (362mm) Clip Location 5. Install Sink 14.25” (362mm) • Use a bead of clear silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the opening in the countertop. Place sink over cutout hole and press firmly • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip • Allow sealant to set for 30 – 60 minutes NOTE: Use acetone or rubbing alcohol to remove any excess sealant 6.
Codes/Standards Applicable: BATHROOM SINK WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Solid Surface Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Solid Surface Sink) to be free from defects in material and workmanship under normal usage for the lifetime of the product.
COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
