INSTALLATION MANUAL Natura™ Series White Matte Vessel Bathroom Sink KSV-1MW / KSV-2MW / KSV -3MW / KSV-4MW / KSV-5MW / KSV-6MW www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Inspect the sink prior to installation to make sure it has not been cracked or chipped during shipping • Observe all plumbing and building codes according to your state requirements • Additional floor and wall preparation may be required to avoid damaging the sink WARNING: This product is fragile and can break, chip, or cause injury if handled recklessly.
Adjustable wrench Tools you will need: J Safety Goggles Drill Pencil Tape Measure Silicone Sealant Silicone Adhesive Phillips sc 4” Hole Saw Parts List (Included) • Cleaning Sponge • Buffing Paper I Dimensions 20” 20” D 1.7”1.7” 14” 14” 15” 15” 4.9” 4.9” KSV-1MW 15” x 4.9” 4 4.9” 4.9” KSV-2MW 20” x 14” x 4.9” 1.7” 1.
Dimensions 19.6” 19.6” 19.6” 1.7” 1.7” 1.7” 15.7” 15.7” 15.7” 3.6” 3.6” 4.3” KSV-3MW 19.6” x 15.7” x 4.3” KSV-4MW 19.6” x 15.7” x 3.6” 16.8” 16.8” 16.4” 16.4” 1.7” 1.7” 16.8” 16.8” 1.7” 1.7” 6” 6” 6” 6” KSV-5MW 16.8” x 16.8” x 6” KSV-6MW 16.
1. Mark Faucet and Drain Hole Location • Place sink in desired location on countertop and mark drain hole and faucet hole centerline with a pencil NOTE: Make sure clearance is suitable for backsplash, faucet, and sink plumbing NOTE: Please allow a minimum of 3.
2. Drill Countertop • Cut the drain opening in the countertop by carefully placing the 4” hole saw on the area marked by pencil 3. Apply Silicone • Check the alignment of the sink to the opening in the countertop.
4. Install Sink • Carefully place the sink on the countertop, align, and press firmly • Allow sealant to set for 30 – 60 minutes Use acetone or rubbing alcohol to remove any excess sealant immediately after application NOTE: 4. Install Plumbing Fixtures • Connect drain to sink. Connect trap to drain.
Codes/Standards Applicable: BATHROOM SINK WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Solid Surface Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Solid Surface Sink) to be free from defects in material and workmanship under normal usage for the lifetime of the product.
COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
