R INSTALLATION GUIDE Stainless Kitchen Sink KTM24 / KTM25 / KTM32 / KTM33 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure that you have all necessary parts by checking the parts list.
Tools you will need: Safety Goggles Drill Silicone Adhesive Jig Saw Phillips Screwdriver Putty Knife Tape Measure Pencil Scissors Screwdriver NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with countertop materials other than wood, marble or granite.
Dimensions: Ø1 3/8" Ø1 3/8" (35mm) (35mm) (89mm) 22" (558mm) 3 1/2" (400mm) 22" (85mm) typ. (560mm) (89mm) (480mm) 18 7/8" 3 1/2" (170mm) 6 3/4" (180mm) typ. 15 3/4" R 3 3/8" R 7 1/8" R 3 7/8" R 2" (45mm) typ. (50mm) typ.
Step 1. Verify cabinet clearance Step 2.
Step 3. Insert the clips into the channels (bottom view) Step 4. Drill pilot hole and then cut the countertop opening NOTE: Must be done by a licensed professional.
Step 5. Verify fit and adjust cutout if needed Step 6.
Step 7. Apply silicone sealant Wipe away any excess sealant Step 8. Install the strainer(s) · Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA B125.2 and with CUPC certification.
Codes/Standards Applicable UP C C R Kitchen Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Kitchen Sink" in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.
If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an Authorized Partner please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
R INSTALLATION GUIDE Kitchen Strainer ST-1 / ST-2 / ST-3 / BST-1 / BST-2 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.
Diagram and Parts List ST-1 A B C D A. B. C. D. E. F. G. H. Strainer Cover Screw Metal Strainer Foam Gasket Rubber Gasket Main Body Drain Gasket Drain Nut A. B. C. D. E. F. G. H.
Diagram and Parts List BST-1 A B C D E F A. Strainer Cover B. Basket C. Screw D. Metal Strainer E. Foam Gasket F. Rubber Gasket G. Main Body H. Drain Gasket I. Drain Nut G H I BST-2 A B C D E F G H I A. Strainer Cover B. Basket C. Screw D. Metal Strainer E. Foam Gasket F. Rubber Gasket G. Main Body H. Drain Gasket I.
Diagram and Parts List ST-3 A B C D E F G H A. B. C. D. E. F. G. H.
Dimensions Ø4 1/2" Ø4 1/2" (115mm) 3 3/4" 3 3/4" (94mm) (94mm) 1 1/2" 11 1/2" NPSM Ø4 1/2" (115mm) 1 1/2" 11 1/2" NPSM Ø4 3/4" (119mm) Model #: ST-1 Dimensions: Ø4 1/2" x 3 3/4" (114mm) 4 1/2" (114mm) 1 1/2" 11 1/2" NPSM Ø4 3/4" (119mm) Model #: ST-2 Dimensions: Ø4 1/2" x 3 3/4" 4 5/8" (116mm) Model #: BST-1 Dimensions: Ø4 1/2" x 4 1/2" 4 1/2" (114mm) Ø4 1/2" R1/2" (13mm) (114mm) 4 1/2" (114mm) 4 1/2" (114mm) 2 5/8" (65.
Step 1.
Step 2. Insert metal strainer into drain hole with foam gasket attached.
Step 3. Using the screw, tighten the metal strainer and main body into place Screw Step 4.
Replacement Parts ST-1 Replacement Parts List A B C D Finish A. Strainer Cover SS* A. Strainer Cover PGM* B. Screw 1 1/4" SS* B. Screw 1 1/4" PGM* C. Metal Strainer SS* C. Metal Strainer PGM* Part # KPU00010 KPU00010-PGM KPU00003 KPU00003-PGM KPU00011 KPU00011-PGM E D. Foam Gasket KPU00005 F E. Rubber Gasket KPU00006 F. Main Body KPU00012 G. Drain Gasket KPU00008 H.
Replacement Parts ST-2 Replacement Parts List A B C D E F G H Finish Part # A. Strainer Cover KPU00010 B. Screw 1 5/8" KPU00013 C. Metal Strainer KPU00011 D. Foam Gasket KPU00005 E. Rubber Gasket KPU00006 F. Main Body KPU00012 G. Drain Gasket KPU00008 H.
Replacement Parts BST-1 Replacement Parts List Finish Part # A B C D E F G A. Strainer Cover KPU00001 B. Basket KPU00002 C. Screw 1 1/4" KPU00003 D. Metal Strainer KPU00004 E. Foam Gasket KPU00005 F. Rubber Gasket KPU00006 G. Main Body KPU00007 H. Drain Gasket KPU00008 I. KPU00009 Drain Nut H I BST-2 Replacement Parts List A B C D E F G H I Finish Part # A. Strainer Cover KPU00001 B. Basket KPU00002 C. Screw 1 5/8" KPU00013 D. Metal Strainer KPU00004 E.
Replacement Parts ST-3 Replacement Parts List A B C D E F G H Finish Part # A. Strainer Cover KP22191 B. Screw KP22198 C. Metal Strainer KP22192 D. Foam Gasket KP22193 E. Rubber Gasket KP22194 F. Main Body KP22195 G. Drain Gasket KP22196 H.
Accessories Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Accessories” in their original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Accessories) to be free from defects in material and workmanship under normal usage for a period of one (1) years.
If you are a HOMEOWNER, please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-Free : 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL, please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an AUTHORIZED PARTNER, please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
