INSTALLATION GUIDE Arlo™ Single Lever Vessel Faucet KVF-1200 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement • Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure • Pre-drilled countertop hole size requirement: 1-3/8” (min) • Max countertop thickness: 2” Diagram and Parts List F A G H B C I D E A. Faucet Body B. Washer C.
Faucet Dimension 6 3/4” [171mm] 5” [128mm] 12 1/8” [307mm] 8 1/4” [209mm] 2 1/4” [57mm] 2” [51mm] 2-9/16-24UNEF-2B Installer Tip: Shut off main water supply before installing new faucet 3
Step 1: Remove washer and lock nut Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the washer (B) and lock nut (C) from the faucet (A). A B C Step 2: Install faucet A E Before installation, ensure that the flange (E) is placed on the bottom of the faucet assembly (A). Place faucet (A) through the 1-3/8” holes in countertop . Secure the faucet (A) to the countertop using the washer (B) and lock nut (C) provided.
Step 3: Connect waterlines to main valve Attach waterlines(D) to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) D Step 4: Install Press pop-up assembly 1 2 3 4 5 6 5 Unscrew the nut (5) from the pop-up body (1), move over the tail pipe (6) and washer (4), then unscrew the coupling nut (3) and remove the washer (2).
Step 4: Install Press pop-up assembly 3 217 8 17/32” 279 10 31/32” 4 Max35 Max1 3/8” 1 2 Place the washer (1) underneath the flange of the pop-up body (2). Slide the pop-up body (2) down through the drain hole on the vessel or basin. From underside, slide the washer (3) against the bottom of the vessel or basin, thread on the coupling nut (4) and tighten. Do not overtighten. Slide the nut (2) over the tail pipe (3). Place the washer (1) into the nut and tighten. Do not overtighten.
Replacement Parts 2 3 1 14 815 32 3/32” 4 1. Index 5 6 194 7 5/8” 2. Set Screw 3. 1Handle 2 7 4. Cap Ø35~Ø38 Ø1 3/8”~Ø1 1/2” Ø35~Ø38 Ø1 3/8~Ø1 1/2” 8 3 5. Bonnet Nut 6. Screw 4 5 7. Cartridge 6 8 8. Aerator 9 4 7 6 8 9. Aerator Wrench 10. Washer 11. Lock Nut 10 s Les n tha m 90m 11 12. Flange 13. Press pop-up assembly 14.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION 10 Leakage under the handle Bonnet nut (5) has come loose Hexagon Nut 9 11 12 Aerator drips or has inconsistent water flow pattern Aerator (8) is dirty or not seated properly Unscrew aerator (8) with aerator wrench (9) Cold and clean Hot out debris Water will not shut off completely Cartridge may need to be adjusted or replac
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R &T NSF/ANSI 61 ASME A112.18.1 1.2GPM 4.5L/min maximum TM Faucet Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.