R INSTALLATION MANUAL Indy Single Lever Vessel Faucet TM KVF-1400 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! R Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
STOP Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. R · Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
Tools Required Adjustable Wrench Phillips Screwdriver Safety Goggles 4 Silicone Sealant Pipe Tape
Diagram and Parts List A G B C D E F A. B. C. D. E. Faucet Body Metal Base Ring Rubber Washer Metal Washer Mounting Nut F. G.
(40mm) (45mm) Max. 1 3/4" Ø2" (50mm) Ø1 3/8" ~ 1 5/8" hole size (35~40mm) 2 x 9/16"-UNEF-24 Installer Tip: Shut off main water supply before installing new faucet.
Step 1. Install faucet and mounting hardware A C&D Place the faucet (A) through the mounting hole in the sink until the faucet (A) sits on top of the sink. Secure the faucet (A) to the sink using the rubber (C) and metal washers (D), mounting nut (E) and mounting screws (F) provided. C&D E F E F Step 2. Connect waterlines to main valve Attach waterlines to angle stops and tighten until snug. Turn on angle stops and check for leaks. (DO NOT TURN FAUCET ON) NOTE: Make sure filter washers are installed.
Replacement Parts Replacement Parts List 1 2 3 4 5 6 14 7 Finish/Color Part # 1. Metal Handle SFS,MB,CH,BG* KP06177 2. Handle Button GR, BL, YL* KP06026 3. Set Screw M5x6RB 4. Cartridge Cover KP06052 SFS,MB,CH,BG* KP06059 6. Locking Nut KP06176 7. Cartridge KP06101 KP06183 8. Aerator 9. Metal Base Ring 8 9 10 11 12 13 15 8 KP06080 5. O-Ring SFS,MB,CH,BG* KP06181 10. Rubber Washer KP06041 11. Metal Washer KP06028 12. Mounting Nut KP06067 13. Mounting Screws KP06068 14.
Trouble-Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the faucet Bonnet nut has come loose. Remove the index. Loosen set screw with hex wrench. Remove the handle. Unscrew cap (by hand only). Tighten bonnet nut with an adjustable wrench. Cartridge may need to be adjusted or replaced. Remove the index. Loosen set screw with hex wrench. Remove the handle.
Codes/Standards Applicable: NSF/ANSI 372 UP C NSF/ANSI/CAN 61: Q ≤ 1 UP C R C ASME A112.18.1 1.2GPM 4.5L/min maximum C R Faucet - Lifetime Limited Warranty Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
How to Make a Warranty Claim If you are a consumer purchaser, please contact a Kraus Customer Service Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com R If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
