R INSTALLATION MANUAL Kore Workstation Stainless Steel Undermount Kitchen Sinks TM KWU111-23, KWU110-27, KWU110-30, KWU110-32, KWU112-33 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2021 Kraus USA Plumbing LLC I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! R Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
STOP Prior to Installation: · Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. R · Inspect the sink prior to installation to make sure that it has not been damaged during shipping. · Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation. · Use the cut-out template provided by Kraus.
Tools you will need: Safety Goggles Drill Silicone Adhesive Jig Saw Phillips Screwdriver Cut Resistant Gloves Putty Knife Tape Measure Pencil Scissors Screwdriver Closed Toe Shoes NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with countertop materials other than wood, marble or granite.
Parts List KWU111-23 · Cut-Out Template · Mounting Hardware · Bottom Grid KBG-UN1-23 · Strainer ST-1 · Drain Cap STC-2 · Rolling Mat KRM-11BL · Cutting Board KCB-WS101BB KWU110-32 · Cut-Out Template · Mounting Hardware · Bottom Grid KBG-UN1-32 · Strainer ST-1 · Drain Cap STC-2 · Rolling Mat KRM-11BL · Cutting Board KCB-WS103BB KWU110-27 · Cut-Out Template · Mounting Hardware · Bottom Grid KBG-UN1-27 · Strainer ST-1 · Drain Cap STC-2 · Rolling Mat KRM-11BL · Cutting Board KCB-WS103BB KWU112-33 · Cut-Out T
Dimensions 23" (584.2mm) 21" (533.4mm) 27" (685.8mm) 25" (635mm) 5" (127mm) R 0" 3 1/2" (90mm) R 0" (0mm) typ. 10 1/2" (266.5mm) 10" (254mm) 9 3/4" (247.7mm) 10 1/2" (265.5mm) 10" (254mm) (0mm) typ. (247.7mm) 9 3/4" 5" (127mm) 16" (406.4mm) 17" (431.8mm) 19" (482.6mm) 17" (431.8mm) (90mm) 16" (406.4mm) 3 1/2" 5" (127mm) 19" (482.
Dimensions 33" (838.2mm) R 0" (0mm) typ. 17" (431.8mm) 5" 3 1/2" (127mm) 16" (406.4mm) 19" (482.6mm) 31" (787.4mm) (90mm) 15 3/8" 15 3/8" (391.7mm) (391.7mm) 4" (265.5mm) 10 1/2" 10" (254mm) 101.
Step 1.
Step 2. Position Template · · Check the cut-out template against the actual sink to ensure a proper sized cut-out. Place the cut-out template in the desired location on the countertop. NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
Step 3. Trace Template · Trace template on countertop with a pencil.
Step 4. Cut Countertop · Cut the opening in the countertop by carefully following the traced line. ! CAUTION - To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with non-slip grip when cutting. NOTE: Please use the appropriate saw that best fits your countertop material.
Step 5. Set up Mounting Brackets • • Turn countertop over and align sink with countertop. Decide location for mounting brackets. Mounting holes should be 1/2" from edge of sink. 1/2" (13mm) Step 6. Drill Hole in Countertop • Drill 3/8" diameter x 1/2" deep hole in the countertop. ! CAUTION - To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with non-slip grip when drilling.
Step 7. Install Anchors • Insert anchors into drilled holes and lightly tap with a hammer until flush. Step 8. Secure Sink to Countertop · Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop. Place sink over cutout hole and press firmly.
Step 9. Attach Mounting Hardware • • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip. Allow sealant to set for 30 - 60 minutes. NOTE: Use acetone or rubbing alcohol to remove any excess sealant. Step 10. Install Plumbing Fixtures · · 14 Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions. Run water into sink and check for leaks.
Codes/Standards Applicable UP C C R Kitchen Sink - Lifetime Limited Warranty Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Kitchen Sink when purchased from a Kraus authorized dealer and in the location of original installation. This warranty is non-transferable.
How to Make a Warranty Claim If you are a consumer purchaser, please contact a Kraus Customer Service Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com R If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.
IMPORTANT Register Your Kraus Product R Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
