aGO Stylish Wireless Speaker Operation manual Bedienungshandbuch Manual de instrucciones Manuel d’utilisation Brugermanual
SAFETY AND MAINTENANCE INSTRUCTIONS 1. Please read this operation manual carefully before use. 2. The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times. 3. Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat. 4. Do not expose the product to direct sunlight for longer periods.
If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem the retailer will handle the claim directly with KREAFUNK. CONTENT 4 1 x Speaker 1 x User Manual 1 x USB Charging Cable PRODUCT OVERVIEW 6 1 6 5 1. Power on / power off / play / pause (Answer call / End call / Reject call) 2. Volume up / next track 3. Volume down / previous track 4. Micro USB charging port 5.
aGO BUTTON FUNCTIONS Multifunction button • Press button to PLAY or PAUSE music • Press and hold button for 1-2 seconds to turn aGO ON or OFF • When aGO is OFF, press and hold the button for 5 seconds to enter PAIRING MODE • If there is an incoming call, press the button to ACCEPT CALL. Press the button again to END CALL. Press and hold for 1-2 seconds to REJECT CALL.
TURNING YOUR aGO ON OR OFF Press and hold the multifunction button for 1-2 seconds until you hear a sound prompt. When aGO is turned OFF, the LED light will briefly turn red and then off. When aGO is turned ON, a white LED light will appear and flash slowly until a playback device is connected via Bluetooth.
PAIRING YOUR aGO TO A DEVICE the LED light will briefly turn solid white. Your device is now connected. aGO will pair automatically to this device, until you manually disconnect it or enable PAIRING MODE. SET Bluetooth PAIRING TO ANOTHER DEVICE (PAIRING MODE) aGO If you wish to connect aGO to another device than previously connected: 1. Turn aGO OFF 1. Enable your smartphone’s or another Bluetooth playback device’s Bluetooth function and search for Bluetooth devices. 2.
BATTERY STATUS • The LED light will turn ORANGE when the battery is charging and above 15% • The LED light will turn GREEN when the battery is fully charged aGO has approximately 10 hours playback time at moderate listening levels, and the battery life will vary depending on volume level. • When aGO has below 15% battery, the LED light will turn SOLID RED • When aGO has below 10% battery, the LED light will FLASH RED When the charger is unplugged, and the battery is above 15%, the LED will turn off.
TECHNICAL SPECIFICATIONS Bluetooth EDR standard Charging via USB cable Working voltage: 3.7-4.2V Charging current: 600mAh (Max) Discharge voltage/current: 5V/1A Frequency distortion: <3% Battery: Built-in lithium ion 3.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
