User Manual

800-447-8638

K4 and K4 Master System Parts

Base

Features setup gauges for positioning the stop collar on the drill bit. Includes four

holes for securing the jig to a workbench or other surface. A recess at the front of

the base accepts a clamp head for temporarily securing the jig to your workbench.

Drill-guide socket

Accepts all Kreg drill guides: Micro, Standard (included), and HD.

Toggle clamp

Secures the workpiece to the jig.

Clamp pad

Adjusts to workpiece thickness.

Standard drill guide

Features positioning marks for different workpiece thicknesses.

Drill-guide locking pin

Locks the drill guide into the drill-guide socket at the selected setting.

Step bit

Simultaneously drills a pilot hole and clearance hole, forming a bearing shoulder

for the screw head.

Stop collar

Fastens to the drill bit to control drilling depth.

Hex wrench

Tightens the stop-collar set screw. Stores in a recess at the rear of the base.

Driver bit

#2 square-drive bit 6" (152mm) long.

Pocket-hole plug sample pack

 Containsvepaint-gradewoodplugs

Additional Master System Parts

The K4 Master System includes the following parts

Portable base

Accepts Micro, Standard, and HD drill guide blocks. Useful for large panels or

 assembliesthatwouldbedifculttoclampintoabench-mountedjig.Built-incams 

secure the portable base to your Kreg face clamp

Workpiece support stop

Supports large workpieces and incorporates a swing-up, micro-adjustable

workpiece stop.

Vacuum port

 Acceptsa1¼"(32mm)shopvacuumhoseforefcientchipremoval.

Parts