Colour Television Owner's Manual KR-270T

Connection to External equipment

DTV Setup

- To watch digitally broadcast programs, purchase and connect a dig-

ital set-top box.

Connections

Connect the digital set-top box video outputs to the COMPONENT

(Y, P

B, PR) jacks and connect the digital set-top box audio outputs to

the AUDIO jacks.

Viewing Setup

1. Turn on the digital set-top box. (Refer to the owner’s manual for the

digital set-top box.)

2. Use the INPUT SELECT or PC/DVI button on the remote control to

select COMPONENT.

PC/ DTV Setup

- After setup, be sure to select RGB-PC source on TV.

Connections

1. Set the monitor output resolution on the PC before connecting to

the TV.

2. Connect the TV to the PC with the PC cable.

3. Connect the PC audio output to the TV's PC SOUND input.

Viewing Setup

1. Turn on the PC.

2. Use the INPUT SELECT or PC/DVI button on the remote control

to select RGB-PC or RGB-DTV.

Note: When the set is inputted RGB-DTV signal in RGB-PC

mode, automatically it is set to RGB-DTV mode.

RS-232C INPUTRS-232C INPUT

(CONTROL/SER(CONTROL/SERVICE)VICE)

AAV1V1

VIDEOVIDEO

AUDIOAUDIO

AUDIO INPUTAUDIO INPUT

AUDIOAUDIO

RR LL

COMPONENT COMPONENT INPUT INPUT

(480i/480p/720p/1080i)(480i/480p/720p/1080i)

YY PP

AUDIO Y PB PR(L)

(R)

DTV Receiver (Set-top Box)

RGB INPUTRGB INPUT

AUDIO INPUTAUDIO INPUT

DVI INPUTDVI INPUT

RS-232C INPUTRS-232C INPUT

(CONTROL/SER(CONTROL/SERVICE)VICE)