ENGLISH 40” WIDE LCD Color TV/MONITOR Owner’s Manual Model: KR-400T
ENGLISH Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN. WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons..
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
11. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.
Before operating the set, please read this manual carefully. Warnings Important Safety Instructions Contents Supplied Accessories Controls Channel of panel Remote controller Basic Operation On and off Channel selection Volume adjustment Q.
Supplied Accessories L Make sure the following accessories are provided with Product. 1. Batteries (2EA) 2. Remote controller 5. PC DIGITAL IN cable FRANÇAIS ENGLISH 3. Owner’s manual 6. PC Audio IN cable ESPAÑOL 40" Wide LCD Color TV 4. PC ANALOG IN cable Model : KR-400T Owner’s Manual 7. AC Cord Battery installation uInserting batteries 1. Remove the battery cover by pulling it upward in the direction shown by the arrow. 2.
1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + CH - (Channel Up/Down) Selects a Channel or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, VIDEO, COMPONENT, S-VIDEO, PC-ANALOG, PC-DIGITAL or DTV mode./Clears the menu from the screen. 6. Power Indicator Illuminates in red when the TV is in standby mode./ Illuminates in green when the TV is switched on. Illuminates in blinked when the power save mode(only PC mode). 7.
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE Turns the sound on and off. 3. NUMBER buttons Selects Channel numbers. 4. PSM (Picture Status Memory) Recalls your preferred picture setting 5.
ENGLISH Controls 12. CHxy (Channel Up/Down) Selects next Channel or a menu item. 13. VOLÏq (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 14. OK Accepts your selection or displays the current mode. 15. CC Set the caption function. 16. Q.VIEW Returns to the previously viewed Channel. 17. LIST Displays the program list menu. 18. PIP Displays a PIP(Picture In Picture) screen. 19. ARC Selects a screen mode- 16:9, 14:9, ZOOM,1:1, 4:3. 20.
Basic Operation Turning the TV On and Off Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the Power button on the remote controller or the TV itself to turn the TV on. 2. Press the Power button again on the remote controller or the TV itself to turn the TV off. Note : If the TV is on and the power button is pressed to turn the TV off, the TV goes into standby mode.
ENGLISH On Screen Menus and Display 1. Press the MENU button to display main menu. xy button to select menus-Picture, 2. Press the CHx Sound, Special, Setup. Ïq button. 3. Adjust each menu with the VOLÏ 4. Press the MENU button to return to preceding menu. 5. Press the TV/AV button to finish adjusting menu. Equalizer Flat Music Movie Speech User 0.1 0.5 1.5 5.
Setting up TV Channel Once you have preset the Channel, you will be able to use xy to scan the Channel you Programmed. the CHx Channel can be tuned using Auto or Manual Program menu. Auto Program All Channel that can be received are stored by this method. It is recommended that you use Auto Program during installation of this set. 1. Press the MENU button. 2. Select the Setup menu. 3. Select the Auto program menu. xy button to select Tuner mode. 4. Press the CHx 5.
Manual Program Manual Program lets you manually tune and arrange the Channels in whatever order you desire. Also you can assign a Channel name with 5 characters to each Channel number. 1. Press the MENU button. 2. Select the Setup menu. 3. Select Manual program menu. xy button to select Tuner mode. 4. Press the CHx Ïq button. 5. Select a Tuner mode with the VOLÏ TV ÏqCable xy button to select Channel. 6. Press the CHx 7. Select the Fine menu and adjust the received signal Ïq button.
Setting up TV Channel Program list Program Iist You can check the Programs stored in the memory by displaying the Program list. 1 6 2 7 3 8 4 9 1. Press the MENU button. 2. Select the Setup menu. xy button select Program list. 3. Press the CHx 5 xy Ïq OK MENU TV/AV Selecting a Channel in the Program list xyor VOLÏ Ïq button. Select a Channel with the CHx The set switches to the chosen Channel number.
You can adjust picture Contrast, Brightness, Color, Sharpness and Tint to the levels you prefer. Manual Picture Control 1. Press the MENU button. 2. Select the Picture. xy buttons to select a picture item. 3. Press the CHx Ïq buttons to adjust the picture 4. Press the VOLÏ condition as you want. 5. Press the TV/AV button to store for the picture User.
Sound Control You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change program. 1. Press the MENU button. 2. Select the Sound menu. xy button to select the desired 3. Press the CHx sound item; Equalizer, Balance, AVL, Surround or nVolume, MTS. Ïq button to make desired adjustment. 4.
Closed captioning is a process, which converts the audio portion of a television program into written words, which then appear on the television screen in a form similar to subtitles. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Shooting... Goal in..... Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance.
Parental Control If used, this optional feature can “block” undesirable programming from appearing on the TV. Note: Parental Control is not available in PC Mode. To block Computer inputs, use the block AUX SOURCES option in the Parental Control menu in TV Mode; computer inputs will not be available. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV.
Parental Control 1. Press the MENU button. 2. Select the Setup menu 3. Select the Parental Control. xy button to select. 4. Press the CHx Ïq button 5. Adjust each item with VOLÏ Parental control Age Block Content BLK Aux.
Parental Control INFORMATION MOTION PICTURE ASSOCIATION OF USA (MPAA) RATING SYSTEM Grade Meaning G General Audiences Content not offensive to most viewers Parental Guidance Content is such that parents may not want their PG children to view the program. Suggested Parental Guidance Program is inappropriate for preteens, with a greater degree of offensive material Suggested than a PG PG-13 Suggested rated program R Restricted viewing NC-17 Restricted Viewing Not for children under age 17.
ENGLISH Other functions TV, VIDEO, COMPONENT and S-VIDEO modes (You can’t set PC ANALOG and PC DIGITAL mode in this menu. Use the TV/AV button) Inputs can be set for TV, VIDEO, COMPONENT or SVIDEO mode. VIDEO mode is used when a Video Cassette Recorder (VCR), or other equipment is connected to the set. Note: When a VCR is connected to the aerial socket the set is used in TV mode. See the ‘Connection of external equipment’ section. 1. Press the MENU button. 2. Select the Special menu. 3.
Other functions Sleep timer You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Press the SLEEP button to select the number of minutes. The display will appear on the screen, followed by 0, 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. Note: a. To view the remaining sleep time, press the SLEEP button once. b.
You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. Antenna connection. 1. Connect RF out on the VCR to the Antenna input on the rear of the TV 2. Connect the antenna cable to the antenna in jack on the VCR. 3. Use the TV/AV button to select TV mode. 4. Press the PLAY button on the VCR. COMPONENT INPUT 1. Connect the COMPONENT video output sockets (Y Cb Cr) of the COMPONENT to the COMPONENT INPUT sockets of the set. 2.
External Equipment Connection S-VIDEO Input If using an S-VIDEO source, the picture quality will be improved over a video source. 1. Connect the S-VIDEO output of a VCR to the S-VIDEO input on the TV. 2. Connect the audio cables from the S-VIDEO VCR to the L (MONO) R inputs on the TV. 3. Select S-VIDEO mode by pressing the TV/AV button repeatedly. 4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. DTV Input 1.
ENGLISH Connecting PC as monitor Picture adjustment You can adjust picture Contrast, Brightness, Horizontal/Vertical position,Clock, Phase, Auto and Reset as you prefer. 1. Press the TV/AV or TV/PC button to select the PC mode. 2. Press the MENU button. xy button to select the desired 3. Press the CHx picture item. Ïqbutton to make appropriate 4. Press the VOLÏ adjustments. Contrast This function is to adjust picture to light/dark. Brightness This function is to adjust brightness of picture.
Connecting PC as monitor PC ANALOG(D-SUB) INPUT 1. Connect the PC ANALOG IN cable (D sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set. 2. Connect the PC Audio IN cable from the PC to the PC Audio IN of the set. 3. Press the TV/AV or TV/PC button to select PC ANALOG IN mode. 4. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. PC DIGITAL(DVI) INPUT 1. Connect the DVI of PC to the DVI input on the TV. 2.
ENGLISH Product Spec. Model Main body (with stand) KR-400T Horizontal size Height 1085 mm 632(704) mm Thickness 110(280) mm Weight Television system NTSC Television program VHF: 2~13 UHF: 14~69 Cable: 01~125 LCD PANEL 40” WIDE TFT LCD panel Resolustion WXGA(1280 X 768) Power consumption 28.5(33) kg MAX.
Troubleshooting Problem Check item No picture on screen and no sound from speakers. • Make sure the remote control is not in the standby mode (The POWER/Standby indicator is red.) No picture/No picture from AV terminal. • Check the brightness setting of the display. • Lamp may have malfunction. • Make sure a cable with no VIDEO input signal is connected to the S-VIDEO INPUT terminal. Picture is displayed, but no sound from the speakers. • Check the sound setting. • Make sure the sound is not muted.
ENGLISH LIMITED WARRANTY 31
