LCD Color TV/MONITOR Owner's Manual KR-400T

ENGLISH
23
Other functions
TV, VIDEO, COMPONENT and
S-VIDEO modes
(You can’t set PC ANALOG and PC DIGITAL mode in this
menu. Use the TV/AV button)
Inputs can be set for TV, VIDEO, COMPONENT or S-
VIDEO mode. VIDEO mode is used when a Video Cassette
Recorder (VCR), or other equipment is connected to the
set.
Note: When a VCR is connected to the aerial socket the
set is used in TV mode. See the ‘Connection of external
equipment’ section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the CH
xxyy
button to select Input.
4. Press the VOL
ÏÏqq
button to select TV, VIDEO,
COMPONENT and S-VIDEO.
VIDEO: VIDEO OUT connected to the VIDEO socket of
the set.
COMPONENT: COMPONENT connected to the
COMPONENT INPUT socket of the set.
S-VIDEO: S-VIDEO VCR connected to the S-VIDEO
sockets of the set.
Alternatively you can select the TV, VIDEO, COMPONEN-
T, S-VIDEO, PC ANALOG and PC DIGITAL, DTV modes
by pressing the TV/AV button.
PC ANALOG: PC connected to the D-SUB in of the set.
PC DIGITAL: PC connected to the DVI in of the set.
DTV: DTV Set Top Box connected to the DTV IN of the set.
Auto sleep
If you select Auto sleep on the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENU button, select the Special menu.
2. Press the CH
xxyy
button to select Auto sleep.
3. Press the VOL
ÏÏqq
button to select On.
4. Press the TV/AV button to return to normal TV viewing.
Blue back
Channel without signal appear in blue.
xy Ïq MENU TV/AV
Special
Input TV
Auto Sleep Off
Blue back Off
Captions Off