Inc. EVOLUTION TWO MONAURAL PREAMPLIFIER OWNER'S MANUAL

8. Use the level control knob or up and down keys to scroll to: BACK.

9. Press the enter button or key to return to: TRIGGER 1.

10. Use the level control knob or the up and down keys to scroll to: TRIGGER 2.

11. Repeat Steps 3-7 to set Trigger 2.

The 12 Volt trigger output is enabled at power on for the selected trigger (Trigger 1

or 2).

OFF

The 12 Volt trigger output is disabled at power on for the selected trigger (Trigger

1 or 2).

DELAY

The 12 volt trigger output is enabled at power on for the selected trigger (Trigger 1

or 2), and the delayed for a period of time (0-20 seconds).

RC-5 Control

This function enables you to change the link transmit status of the Evolution Two.

The options are:

LINK TRANSMIT, LINK RECEIVE.

Enter the menu, then:

1. Use the level control knob on the preamplifier chassis front panel or up and

down keys (16) on the remote control to select:

RC-5 CONTROL.

2. Press the enter button on the preamplifier chassis front panel or the enter key

(18) on the remote control

. The front panel display (15) shows the default

mode:

LINK TRANSMIT.

3. Use the level control knob or the up and down keys to select the desired

option:

LINK TRANSMIT or LINK RECEIVE.

4. Press the enter button or key to confirm the selection. The front panel display

reads:

RC-5 CONTROL.

The right-ter

minated pr

eamplifier channel is the link transmitter of RC-5 data.

Connect the RC-5 cable to the RC-5 connector on the right-terminated preampli-

fier channel. For more information on linked preamplifier channels, see

Appendix:

CAN Link and Multiple Evolution T

wo Pr

eamplifiers,

on page

continue