Inc. Integrated Transport & Processor Owner's Reference

KPS-30i BASIC OPERATION

Below are instructions for quick installation of the KPS-30i. Please refer to

the Typical System Setup illustration on page 16. Also, allow the unit to settle

at room temperature before operation is started.

Plug the KPS-30i into a standard wall AC receptacle. Connect the KPS-30i

output to the appropriate preamp input. Engage the power switch on the

rear panel by pushing it up to the ON position. This powers the processor

section in the KPS-30i.

2. Press the Power button on the front panel to power the transport stage. The

display section will now illuminate. The processor portion of the KPS-30i is

on at all times once the rear panel switch is engaged. This is to insure

thermal stability and to maintain best sonic performance.

3. Using the built in depression, slide the top cover rearward to expose the CD

transport and spindle. Place the compact disc, label side up, onto the drive

spindle. Place the custom clamp onto the drive spindle, securing the CD in

place. Make sure the clamp is centered firmly on the CD spindle hub. Slide

the top cover forward to close the assembly. READ will appear in the display

window while the CD’s contents are being scanned.

NOTE: In the event that you wish to rapidly change a number of CDs, the

KPS-30i can be played with the cover open. However, do not forget that you

are compromising the quality of the music when the CD is exposed to light.

Also, it is always preferable to close the cover when playing music at a high

volume in order to maintain optimum tracking.

4. Press Play on the front panel or remote control. ~’he disc will start playing

from track 1. To select a different track you can press the track forward {>1}

or track back {I <} button until you reach the desired track number or punch

the number of the desired track into the keypad on the front panel or remote

control.

NOTE: Holding the >1 or I< button will engage the Search Forward or the

Search Back functions. See page 8 for more details.

5. Press the Stop button to stop play.