Inc. Turntable Owner's Reference

J. OUESTIONS AND ANSWERS

Q. My Digital to Analog ~processor will accommodate

either fibre optic or coaxial digital inputs. Which output

should I use on the MD-10?

A. While a high quality coaxial willperform quite well,

we re.commend glass fibre optic cabre due to its ab.ility to

completely isolate the grounding planes between the.

transport and processor, and its resistance to RF interter-

ence. If an AT&T or AES/EBU input is available, we

recommend one of these interfaces be utilized.

IQ. When listening to certain discs I hear skipping noises.

s there something wrong with the MD-10?

A. Due to the accuracy of the laser reading system in the

MD-10, discs must be kept reasonably clean. If the disc

is mistracking, it could be because of excessive dirt or

fingerprints. Clean the disc and retry. If the disc still

s~ps, try several others. If it is only the first disc that is

skipping, the disc may. need to be replaced. If the unit

mistracks on several discs, contact your Krell dealer or

distributor.

Q. ! can not seem to get the FTS programming feature to

program my discs, is there something wrong?

A. Make sure the disc you wish to program is indexed, or

read, by the machine before you start your program.

Refer to the FTS programming instructions in this refer-

e.nce..Make sure when you are playing FTS encoded

cliscs tlaat the FTS button is pr.essei:l and the display reads

FTS. If the sequence is altered the MD-10 can not cor-

rectly correlate the FTS information.

tQ. Do you recommend I leave the MD-10 ON at all

lmes?

A. Yes, These circuits are most accurate and stable when

left to idle when not in use. In fact, discrete parts age

.faster when cycled ON and OFE The MD-10 will sound

better and last longer if left ON.

NOTE: You should disconnect the AC cord from the wall

outlet before any electrical storms or if you plan to be

away from your home for prolonged periods of time.

Q. Will the MD-10 play if the dust cover is fully raised?

A. Certainly. The unit will function perfectly even with

the dust cover removed.