Owner manual

(SECTION SEVEN: Customizing the Phantom continued)

Stereo/Mono

1. Use the level control knob on the preamplifier front panel or up and down keys

(14) on the remote control to select:

STEREO/MONO.

2. Press the enter button or key (6) on the remote control. The front panel display

(3) shows the default mode:

STEREO.

3. Use the level control knob or the up and down keys to select the desired

option:

STEREO or MONO L+R.

4. Press the enter button or key to conirm the selection. The front panel dislay

reads:

STEREO/MONO.

STEREO

The left and right subwoofer connections output independent left and right sig-

nals. For use with subwoofers that have stereo inputs or individual left and right

subwoofers.

MONO L+R

The left and right subwoofer connections output combined left + right signals.

For use with subwoofers tha have a monaural input.

Phase

1. Use the level control knob on the preamplifier front panel or up and down keys

(14) on the remote control to select:

SUBWOOFER PHASE.

2. Press the enter button or key (6) on the remote control. The front panel display

(3) shows the default mode:

NORMAL.

3. Use the level control knob or the up and down keys to select the desired

phase:

NORMAL or INVERTED.

4. Press the enter button or key to conirm the selection. The front panel dislay

reads:

SUBWOOFER PHASE.

NORMAL

The subwoofer outputs are in phase relative to the main outputs.

INVERTED

The subwoofer outputs are 180° out of phase relative to the main outputs.

continued