Instruction Manual

I M P O RTA N T
3. Use the level control knob or the Volume up and down keys to
select the desired input: S-1, S-2, S-3 or B-1.
4. Press the enter button or key to confirm the selection.
S-1, S-2, S-3 or B-1
The selected input is set to THEATER and the volume control is disen-
gaged for that input on the S-300i.
OFF
ALL inputs are configured normally and the volume control is engaged
for all inputs on the S-300i.
Note
Only one input on the S-300i can be in theater mode at a time. if the
input trigger is configured for THEATER, the S-300i selects the theater
input automatically upon power on. See Input Trigger, on pages 35-36.
Display
This function enables you to turn the front panel display (9) on or off
all the time, or turn it off after a time out. It also allows the adjust-
ment of display brightness. The options are: ON, TIMED, or OFF.
Enter the menu, then:
1 . Use the level control knob on the preamplifier front panel or the
volume up and down keys on the remote control (7) to select:
D I S P L AY.
2 . Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the default mode: M O D E .
3 . Press the level control knob or key (8) again. The front panel
display shows the default mode: ON.
4 . Use the level control knob or the volume up and down keys to
select the desired option: ON,Timed or OFF.
5 . Press the level control knob or key to confirm the selection. The
front panel display reads: MODE.
6 . Use the level control knob or the volume up and down keys to
select: BRIGHTNESS.
2 0 Krell S-300i
Optional Configurations,
c o n t i n u e d