Marrieds has been providing re label, affordable automotive products developed with the DIY customer In mind. Our extensive ine of power Inverters, lump starters, booster cables and more were developed with our roads and drivers In mind. With hundreds of automotive products, Besieger has helped cheap our customers on the go by providing well priced automotive products with competitive performance and durable ity.
TABLE OF CONTENTS Welcome BESIEGER.
model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-677! WELCOME Please read this manual thoroughly before Installing and operating your new Besieger inverter. This manual contains Information you need 10 obtain the performance required for your application. Keep this manual for future reference. This Besieger inverts converts low voltage direct current {DC) to 115 V pure sine wave (PSW} alternating current (AC).
CAUTIONS: INVERTER OPERATING ENVIRONMENT * Surrounding alr temperature should be between -20°C and 40°C (4°F and 104°F) — Ideally between 15°C and 25°C (60°F and 80°F). * Keep the inverter away from direct sunlight if at all possible. + Keep the area surrounding the inverter clear to ensure free air circulation around the unit. Da not place items on or over the inverter during operation. The unit will shut down if the internal temperature gets too hot. Restart the inverter after it cools.
{ SAFETY INFORMATION model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-677! POWER REQUIREMENTS When a motorized appliance or a tool tums on, there Is an Initial surge of power to start. This surge of power Is referred to as the "starting load" or "peak load." Once started, the tool or appliance requires less power to operate. This Is referred to as the "continuous load” In terms of power requirements.
BESIEGER. FRONT PANEL Oo LCD Digital Display (see LCD diagram on a Two USB Ports QC3.0 {5V/3A, 9V/2A, 18W max) next page). | .
o Battery Level (25%, 50%, 75%; 100%). a Temperature Shutdown. a Warning Indicator: \ GETTING STARTED model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-6775 LCD DISPLAY Output Wattage (W), Input Voltage: (VD. or Output Voltage Display. oA FLOW VOLTAGE uuu i: LL a. High voltage b. Low voltage ¢. Overload oO Error. Remote Instructions Tha included cremate control features an LED indicator sawing on/off light, push button and 20' (6 m) cable that simply plugs into the inverter.
BESIEGER. REAR PANEL a Positive Power Input Terminal. oO Thermal Activated High-Speed Cooling | i Fans. When temperatures inside inverter {Negative Power Input Terminal. exceeds a prates limit, the cooling fans automatically turn en to cool the invader. ‘When the temperature reduces, the fans turn off. oD Ground Terminal. GETTING STARTED CABLE GAUGES When connecting the inverter to a battery bank use the thickest stranded insulated copper wire available, in the shortest length practicable.
\ GETTING STARTED model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-677! HARDWIRED INSTRUCTIONS ‘This inverter comes equipped with an optional AC output hardwired connection to allow for direction connection fo an off-grid electrical panel. All AC wiring ( inverter to AC panels, AC panels to circuit breakers, and Jugfuls) must be rated to at the current rating of the fuses and/or circuit breakers. Multi strand wire is required. Typically, 15A circuit breaker requires a 12 AWG wire.
BESIEGER. SELECT BATTERY TYPE Select 12V “Deep Cycle” batteries to receive optimum performance from your power inverter. If connected to a vehicle, boat or RV, we recommend fo keep engine running while inverter is in use. If the batteries you connect to the power inverter are not true Deep Cycle batteries, their operational lifetimes may be significantly shortened.
model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-677! INSTALLING THE INVERTER Your Besieger ® Inverter should not be mounted under the hood of a vehicle. If installing in a vehicle, choose a dry, cool, ventilated area as close to the battery as practical. Before drilling any mounting holes, make sure that there are no wires, fuel lines or tanks directly behind the surface to be drilled to install the inverter: 1. Inverter must be off.
OPERATION 1. Ensure the Inverter Is OFF. 2. Ensure the appliance ta bs operated is muted OFF and plug it's electrical cord into one of the AC auntie on the front of the inverter. 3. Tum the Inverter ON. 4. Tum the appliance ON. 5. Plug in and tum ON additional appliances as needed. OPERATING A MICROWAVE OVEN WITH YOUR POWER INVERTER The power rating used with microwave ovens is the "cooking power" which means the power being "delivered" to the food being cocked.
model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-677! TROUBLESHOOTING [Gl IRE [OSS ITS RVR The digital display » Low battery voltage * Rachael the battery. Check shows “LOW shutdown feature tums if cables and connections ars VOLTAGE". OFF the inverter. secure. « DC wiring is incorrect = Use proper cable length and gauge. Refer assembly instructions -) page 12 Mon ting the inverter «Battery condition is = Charge or replace the battery if poor. needed.
model no. KP1100 / KP1500 / KP2000 / KP3000 | contact us 1-866-295-677! WARRANTY AND RETURNS IF ANY PARTS ARE MISSING OR DAMAGED, OR IF YOU HAVE ANY QUESTIONS, PLEASE CALL OUR TOLL-FREE HELPLINE AT 1-866-295-6775 Read and understand this instruction manual thoroughly before using the product. It contains important information for your safety as well as operating and maintenance advice. Keep this instruction manual for future use.